Page 1
Kenwood. Disclaimer While every precaution has been taken in the preparation of this manual, Kenwood assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Kenwood reserves...
Curl cable (K29-9333-08) (E30-7531-08) KMC-36 Lever knob (PTT) Curl cable (K29-9333-08) (E30-7531-08) Key top (K29-9335-08) PARTS LIST ✽ : New parts KMC-35 (Y58-3740-20), KMC-36 (Y58-3750-20) Ref. No. Parts No. Description Destination parts ✽ E30-7531-08 CURL CABLE E58-0475-05 MODULAR JACK ✽...
KMC-35/36 DISASSEMBLY FOR REPAIR ■ Main PCB removal 3. Hold the modular connector with your fingers and move it in the direction indicated by the arrow to install the Main 1. Remove the four screws, the rear case and all-round pack- PCB onto the front case.
ON) and if the microphone mute of the transceiver to In the Normal microphone state, if the PTT switch on one which the KMC-35/36 is connected is released, modulation of the microphones is pressed, modulation signals are sent signals can be sent even when the microphone PTT switch is from all microphones.