Application
Temperature Sensor Type TS is used in refrigeration circuits to measure
the refrigerant's temperature.
The Temperature Sensor TS can be used according to its measuring range
in the liquid line, in the injection line, in the hot gas line and in the suction
line of refrigeration circuits. Due to fast temperature capture in refrigeration
circuits the signal can be communicated very fast.
Materials
Body
Stainless Steel, AISI 304
Cable
Thermical rubber poly.
Electrical Connection
Pins
Other appplications on request.
Types
Description
Sensor Type
TS - NFN
NTC 10K Fast
TS - NFR
NTC 10K Fast
TS - RFH
Copyright © 2010 Honeywell GmbH • Subject to change without notice
Temperature Sensor Type TS
FOR REFRIGERATION AND HVAC APPLICATIONS
Temperature Range
-50 °C ... 110 °C
-50 °C ... 110 °C
PT1000
-50 °C ... 110 °C
TEMPERATURE SENSOR
Special Characteristics
Apply Temperature Sensors for usage in regrigeration and HVAC
applications
For installation in liquid line, injection line, hot gas line and suc-
tion line
For usage of refrigerants R22, R134a, R404A, R407C, R410A, R502,
R507; not for Ammonia
Condensation-tight body IP67
Type TS – NFN & TS – NFR:
Type TS – RFH:
Technical Data
Resistance Value:
TS – NFN; TS – NFR
TS – RFH
Accuracy:
TS – NFN
TS – NFR
TS – RFH
Response Time:
Sensitivity:
TS – NFN; TS – NFR
TS – RFH
Measuring Range:
Storage Temperature
Ambient Temperature
Electrical Connection
Dimension
Connecting Cable
Insulation Voltage
Electr. Protection degree:
PRODUCT-DATA
NTC 10K
PT1000
10 kΩ at 25 °C
1 kΩ at 0 °C
1 % Full scale
± 0,2 °C
Class A
K = 5 sec in liquid V = 2 m/s
NTC 10K fast
PT1000
-50 °C ... +110 °C
-25 °C ... 80 °C
-25 °C ... 80 °C
2-wire
Ø 4 mm; l = 40 mm
3 m
250 VAC
IP67
EN0H-1950GE23 R0410