Philips DVDR80/051 Quick Install Manual

Virgin mode
Menu Language
English
Español
Français
Italiano
Deutsch
Press OK to continue
1
Remove the aerial cable plug from your TV set. Insert it into the
ANTENNA IN socket at the back of the DVD recorder
2
Insert one end of the supplied aerial cable into the TV OUT socket at
the back of the DVD recorder and the other end into the aerial input
socket of the TV set.
3
Connect socket EXT 1 TO TV-I/O or sockets OUT S-VIDEO
(Y/C) , VIDEO (CVBS) OUT ,
corresponding input sockets of your TV set.
Connect the scart socket EXT 1 TO TV-I/O at the back of the DVD
recorder with the - suitable for data transfer - scart socket of your TV set
(see the instruction manual of your TV set) using a special cable (suitable for
these data transfers).
4
Switch on the TV set.
5
Use the supplied mains cable to connect the mains socket
4MAINS at the back of the DVD recorder with the wall outlet.
The most important features of the DVD recorder will appear in
scrolling text on the display. After the first installation is completed
this function will be switched off.
6
Switch on the DVD recorder using STANDBY-ON m .
' ' will appear on the display.
7
If necessary, select the programme number for the input socket at the
TV set.
8
The initial installation menu appears on the screen.
9
Select your favourite setting using P- B or P+ A .
Confirm with OK .
The initial installation is carried out automatically. Wait until the whole procedure is complete.
Further settings relate to the GUIDE Plus+
TV programmes available in your area.
To install this system, please read in the user manual the section entitled 'The GUIDE Plus+
System'.
OUT AUDIO L/R with the
® system. This offers a free interactive guide to the
®