Toro 140-2067 Installation Instructions

Jack Mount Kit
for Titan
Model No. 140-2067
Model No. 140-5124
Safety
Safety and Instructional
Decals
Safety decals and instructions are
easily visible to the operator and are
located near any area of potential
danger. Replace any decal that is
damaged or missing.
1. Warning—read the
Operator's Manual.
© 2019—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
® Riding Mowers
127-6663
2. Crushing hazard—engage
the parking brake, shut off
the engine, and remove
the key; support the
machine using jackstands.
Register at www.Toro.com.
Installation
Determine the left and right sides of the machine from
the normal operating position.
1. Park the machine on a level surface,
disengage the blade-control switch, move the
motion-control levers outward to the N
position, and engage the parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Secure the jack mount to the left front axle-tube
using 2 U-bolts and 4 flange nuts
decal127-6663
1. U-bolt
2. Flange nut
4. Torque the fasteners to 22.5 N∙m (200 in-lb).
Form No. 3436-885 Rev A
Installation Instructions
Figure 1
3. Jack mount
4. Left front axle-tube
Original Instructions (EN) All Rights Reserved *3436-885* A
Printed in the USA
EUTRAL
(Figure 1).
g202309