30" and 36" (76.2 and 91.4 cm) range hood (24 pages)
Summary of Contents for Whirlpool RH2300 SERIES
Page 1
RH2300 SERIES RH2600 SERIES IMPORTANT: Read and save these instructions. IMPORTANT: Installer: Leave Installation Instructions with homeowner. Homeowner: Keep Installation Instructions for future reference. Save: Installation Instructions for electrical inspector’s use. 24", 30" and 36" Custom Series Range Hood www.whirlpool.com 628010A/9763371...
Before you start... Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.
Venting requirements Vented-only models Note: Non-vented (recirculating-only) models cannot be converted to vent. Venting system must terminate to the outside. Do not terminate the vent in an attic or other enclosed space. Do not use four-inch laundry-type wall caps. Do not use plastic vent. Vent system needed for installation is not included.
Page 4
centerline centerline Determine and clearly mark a vertical centerline on the wall and cabinet in the area the vent opening will be made. 7-1/2" 2" from wall (not cabinet frame) centerline To wire through top, mark a line 7-1/2" from the right of the centerline on the underside of the cabinet.
Page 5
Install vent through the vent opening in upper cabinet or wall. Complete venting system according to method needed. See “Venting requirements.” Use caulking to seal exterior wall or roof opening. dampers If roof or wall cap does not have a damper, attach rectangular damper supplied with hood to selected rectangular vent opening.
This information will help us respond properly to your request. If you need FSP ® replacement parts... FSP is a registered trademark of Whirlpool Corporation for quality parts. Look for this symbol of quality whenever you need a replacement part for your WHIRLPOOL ®...
Page 7
If you need service, first see the “Troubleshooting” section of the Use & Care Guide. After checking “Troubleshooting,” additional help can be found by checking the “Assistance or Service” section or by calling Whirlpool. In the U.S.A., call 1-800-253-1301. In Canada, call 1-800-807-6777.