Setting a BACnet module (BACnet controller)
Before setting a BACnet module, log in the BACnet module and stop operation.
Page 27 Logging into a BACnet module
Page 31 Stopping an operation
Setting an IP address
The following shows how to set an IP address of a BACnet module.
1.
Select [Settings] [Network Information], and set the following items.
Item
BACnet
PortNo
NetworkNo
IPv4
IP Address
Subnet Mask
Default Gateway
2.
Click the [Update] button.
7 OPERATING EXAMPLE
40
7.2 Writing Values
Description
47808
0
192.168.0.3
255.255.255.0
(No settings)