Page 1
4 Connect the telephone line cord to the unit, then to the telephone line jack until you hear a click. 5 A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service. Note: Use only the supplied Panasonic AC adaptor PNLV226E. Use only the supplied telephone line cord. PNQW4421ZA TT0315MU0...
Page 2
1 Connect the AC adaptor plug to the unit until you hear a click. 2 Connect the AC adaptor to the power outlet. Note: Use only the supplied Panasonic AC adaptor PNLV233E. Battery installation/Battery charging Charge for about 7 hours.
Operating tips Soft keys By pressing a soft key, you can select the feature shown directly above it on the display. Navigator key Symbol Meaning {<} {>} Down Left {<} Right {>} − {^}, {V}, {<}, or {>}: Scroll through various lists and items.
Phonebook (Handset) Adding entries {k} s {B} {r}: “New Entry” (New entry) s {OK} Enter the party’s name. s {OK} • You can change the character entry mode by pressing {R/ECO}. • To enter a name, see the character table in the operating instructions.
Frequently asked questions Question Cause/solution The handset is too far from the base unit. Move closer. Why is _ displayed? The base unit’s AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. The handset is not registered to the base unit. Register it (page 6).
Registering a handset to the base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset. Handset: {B}(13) Base unit: Press and hold {x} for about 5 seconds. Handset: {OK} s Wait until “Base PIN”...