Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instructions
1. SAFETY
Familiarise yourself with this product's application and limitations, as well as any specific potential hazards peculiar to the beacon.
9
Replace or repair damaged parts. Use recommended parts only. Non authorised parts may be dangerous and will invalidate the
9
warranty.
DO NOT use the beacon for any purpose other than for which it is designed.
8
DO NOT allow children to operate the beacon.
8
DO NOT operate the beacon if any parts are missing or damaged as this may cause failure or possible personal injury.
8
When not in use switch the beacon off and where appropriate remove plug from power supply.
9
2. INTRODUCTION
3-Function control allows for different LED flash configurations. Heavy-duty ABS base. Quick release, UV stabilised dome will not
fade if exposed to prolonged sunlight.
WB951LED.V2 - Single point mounting beacon suitable for direct mounting to vehicle roof using 12mm bolt.
WB952LED.V2 - Direct mounting beacon pre-drilled with 3 x 6.5mm holes.
WB954LED.V2 - Fitted with six powerful magnets, strong enough to cope with normal road speeds. Supplied with 3m coiled flex and
universal vehicle accessory socket plug.
WB955LED.V2 - Flexible DIN element suitable for agricultural vehicles where standard beacons may be broken.
3. SPECIFICATION
MODEL No's: W B951LED.V2, WB952LED.V2, WB954LED.V2, WB955LED.V2
Voltage: . ........................................................... 12V/24V (DC)
Light Source . ...............................................SMD2835, 45pcs
Max. Current ....................................................... 1.6A @ 12V
Max. Current ........................................................ 0.8A @24V
Working Temperature ...........................................-30 / +50
EMC ........................................................... E9 10R 05 16099
R65 ...............................................................TA1 E9 00 6105
Waterproof ......................................................................IP56
WB951LED.V2
4. FIXING INSTRUCTIONS
4.1.
WB951LED.V2: 12mm Single Bolt Fixing
4.1.1.
Drill a 13mm mounting hole in a suitable point on the vehicle.
4.1.2.
Connect to cables of at least 2mm² section and use an 8A fuse; check polarities.
4.1.3.
Fix the beacon by using nuts and washers according to the type and shape of the mounting surface
Original Language Version
© Jack Sealey Limited
12V/24V LED WARNING BEACON-
VARIOUS FITTINGS
WB951LED.V2, WB952LED.V2,
MODEL NO:
WB954LED.V2, WB955LED.V2
C
o
WB952LED.V2
WB951LED.V2, WB952LED.V2, WB954LED.V2, WB955LED.V2 Issue 1 14/12/20
WB954LED.V2
WB955LED.V2