Philips ThermoProtect BHD004/10 User Manual

Register your product and get support at
www.philips.com/welcome
EN User manual FR Mode d'emploi
a
a
b
b
c
f
f
(BHD006/10,
(BHD006/10,
BHD007/10)
BHD007/10)
Specifications are subject to change without notice
© 2015 Koninklijke Philips N.V.
All rights reserved.
3140 035 40642
English
Congratulations on your purchase, and welcome to Philips!
To fully benefit from the support that Philips offers, register
your product at www.philips.com/welcome.
1 Important
Read this user manual carefully before you use the
appliance and keep it for future reference.
WARNING: Do not use this
•
appliance near water.
When the appliance is used in a
•
bathroom, unplug it after use
since the proximity of water
presents a risk, even when the
appliance is switched off.
WARNING: Do not use this
•
appliance near bathtubs,
showers, basins or other
vessels containing water.
Always unplug the appliance
•
after use.
BHD004/10
If the appliance overheats,
•
BHD006/10
it switches off automatically.
BHD007/10
Unplug the appliance and let
it cool down for a few minutes.
Before you switch the appliance
on again, check the grilles to
make sure they are not blocked
by fluff, hair, etc.
If the mains cord is damaged,
•
you must have it replaced
by Philips, a service centre
authorised by Philips or similarly
qualified persons in order to
avoid a hazard.
This appliance can be used
•
by children aged from 8 years
and above and persons with
reduced physical, sensory or
mental capabilities or lack of
experience and knowledge
if they have been given
supervision or instruction
e
concerning use of the appliance
e
in a safe way and understand
the hazards involved. Children
shall not play with the
d
appliance. Cleaning and user
d
(BHD006/10,
(BHD006/10, BHD007/10)
maintenance shall not be made
BHD007/10)
c by children without supervision.
For additional protection, we
•
advise you to install a residual
current device (RCD) in the
electrical circuit that supplies
the bathroom. This RCD must
have a rated residual operating
current not higher than 30mA.
Ask your installer for advice.
Do not insert metal objects into
•
the air grilles to avoid
electric shock.
Never block the air grilles.
•
Before you connect the
•
appliance, ensure that the
voltage indicated on the
appliance corresponds to the
local power voltage.
Do not use the appliance
•
for any other purpose than
described in this manual.
Do not use the appliance on
•
artificial hair.
When the appliance is
•
connected to the power, never
leave it unattended.
Never use any accessories or
•
parts from other manufacturers
or that Philips does not
specifically recommend. If
you use such accessories or
parts, your guarantee becomes
invalid.
Do not wind the mains cord
•
round the appliance.
Wait until the appliance has
•
cooled down before you store it.
Do not pull on the power cord
•
after using. Always unplug the
appliance by holding the plug.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic fields.
Environment
This symbol means that this product shall not be
disposed of with normal household waste
(2012/19/EU). Follow your country's rules for the
separate collection of electrical and electronic
products. Correct disposal helps prevent negative
consequences for the environment and human health.
2 Introduction
This new hairdryer has been specially designed to offer you
comfortable and reliable drying at home or while travelling.
It has a compact design, making it easy to use. Its airflow
dries your hair quickly, giving it the lustre, body and richness
you love.
3 Overview
Concentrator
a
Slide switch with 3 heat/speed settings
b
and off position
•
: Strong airflow for fast drying
•
: Constant caring temperature for efficient drying
•
: Cool airflow to set your style
•
: Off
Hanging loop
c
Dual voltage switch
d
Foldable Handle
e
4 Using the Hairdryer
(BHD006/10, BHD007/10 only) Check if the dual voltage
1
switch (on the bottom back part of the handle) has been
set to the local mains voltage before you connect the
appliance. You can adjust the position of the dual voltage
switch with a screwdriver or coin.
Put the plug in the wall socket.
2
Select your desired setting to switch on the appliance.
3
•
Concentrator
The concentrator enables you to focus the airflow on a
specific part of your head. It gives you more control and
direction when you wish to create your desired style.
To connect the concentrator, simply snap it onto
1
the appliance.
To disconnect the concentrator, pull it off the appliance.
2
5 After use
Switch off the appliance and unplug it.
1
Place it on a heat-resistant surface until it cools down.
2
Clean the appliance with a damp cloth.
3
(BHD006/10, BHD007/10 only) To fold the handle, apply
4
soft pressure on the backside of the handle until it folds
( ).
f
Store the appliance in a safe and dry place, free of dust.
5
You can also hang it with the hanging loop (
6 Guarantee & service
If you need information e.g. about replacement of an
attachment or if you have a problem, please visit the Philips
website at www.philips.com/support or contact the Philips
Customer Care Centre in your country (you will find its
phone number in the worldwide guarantee leaflet). If there
is no Consumer Care Centre in your country, go to your local
Philips dealer.
).
c