Sealey AP3508TB Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions
and maintained properly, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instruction
manual
1. SAFETY
1.1. GENERAL SAFETY
 WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this Topchest, Add-
on chest & Rollcab combination.
 Locate the toolbox combination in a suitable working area.
 Use the Rollcab on level and solid ground, preferably concrete.
 Keep the work area clean, uncluttered and ensure that there is adequate lighting.
 Keep the toolbox combination clean and tidy in accordance with good workshop practice.
 Keep children and unauthorised persons away from the working area.
 DO NOT use the toolbox combination for any purpose other than that for which it is designed.
 DO NOT move the toolbox combination with drawers open. To avoid tipping, open one drawer at a time and close and secure all drawers
whilst moving.
 DO NOT overload or step on the drawers.
 DO NOT place the toolbox combination in a damp or wet location or an area where there is condensation.
 DO NOT clean the toolbox combination with any solvents which may damage the surfaces or the protective coating.
 WARNING! The warnings, cautions and instructions referred to in these instructions cannot cover all possible conditions and situations that may
occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must be applied by the operator.
2. INTRODUCTION
Manufactured with double skin side walls for extra strength and finished in smooth, hi-gloss, triple baked enamel. Resists scratches, oil, dirt and
most solvents. Drawers run on 35mm ball bearing runners for strength and drawer faces have full length pulls with chrome style trim. All chests
are supplied with tumbler type security locks and two numbered keys and have drop down carry handles. For mobility around the workshop, even
when fully laden, the rollcab features hard compound rubber wheels, two fixed and two locking castors. All drawers have been specifically sized to
accommodate our range of Siegen tool trays.
3. SPECIFICATIONS
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . AP3503TB . . . . . . . . . . . . . . . . . . . . . AP3505TB . . . . . . . . . . . . . . . . . . . . . AP3508TB
Description: . . . . . . . . . . . . . . . . . . . . . . . . . . Mid-Box . . . . . . . . . . . . . . . . . . . . . . . Topchest. . . . . . . . . . . . . . . . . . . . . . . Rollcab
Specification: W x D x H
Overall Size: . . . . . . . . . . . . . . . . . . . . . . . . . 605 x 310 x 275mm. . . . . . . . . . . . . . 600 x 305 x 470mm . . . . . . . . . . . . . . 615 x 330 x 885mm
Overall Size Inc Handle(s):. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 625 x 305 x 470mm . . . . . . . . . . . . . . 680 x 330 x 885mm
Medium Drawer: . . . . . . . . . . . . . . . . . . . . . . 510 x 270 x 65mm (x3) . . . . . . . . . . . 510 x 270 x 65mm (x5) . . . . . . . . . . . 510 x 270 x 65mm (x5)
Large Drawer: . . . . . . . . . . . . . . . . . . . . . . . . N/A. . . . . . . . . . . . . . . . . . . . . . . . . . . N/A . . . . . . . . . . . . . . . . . . . . . . . . . . . 510 x 270 x 100mm (x3)
© Jack Sealey Limited
INSTRUCTIONS FOR:
8 DRAWER ROLLCAB, 3 DRAWER MID-BOX,
5 DRAWER TOPCHEST: ALL WITH BALL
BEARING RUNNERS. BLACK/GREY
AP3508TB, AP3503TB, AP3505TB
MODEL NOs:
Original Language Version
AP3503TB, AP3505TB, AP3508TB Issue: 1 - 09/06/16