Sealey CX313.V2 Quick Start Manual

Thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instructions
1. safeTy
WarNiNg! ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this
‰
trolley.
Always load evenly with the centre of gravity of the load as near centre of the trolley as possible.
9
Do NoT overload the trolley - see specifications.
8
Use the trolley in a suitable work area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
Keep the trolley clean and tidy in accordance with good workshop practice.
9
Do NoT use the trolley for any purpose other than that for which it is designed.
8
Do NoT stand on the trolley, use it as a ladder or allow others to ride on the trolley.
8
Use the wheel locks to prevent the trolley from inadvertently moving.
9
Do NoT leave unattended, especially when loaded, unless the wheels are locked, chocked or the trolley otherwise secured.
8
Do NoT use trolley on uneven ground and do not run over curbs or steps - use a ramp.
8
Do NoT use trolley if any part is significantly damaged, paying particular attention to the wheels.
8
Keep children and unauthorised persons away from the work area.
9
2. iNTroDuCTioN
Composite garage workshop trolley featuring aluminium corner posts with a 30kg capacity per shelf. each shelf features three compartments
with removable dividers, seven tool holder slots, four additional compartments for small fixings and two cup/can holders. These features allow
for all of your tools and equipment to be on-hand and easily accessed. Quick and easy to assemble, with four swivel castors, two featuring
brakes.
3. speCifiCaTioN
model No: ..............................................................CX313.v2
Capacity: ................................................................ 30kg/level
overall Size (W x D x H): ........................570 x 455 x 895mm
Shelf Size (W x D): ....................................495 x 280 x 70mm
4. CoNTeNTs
© Jack Sealey limited
Workshop Trolley 3-level ComposiTe
WiTh parTs sTorage
CX313.v2
Model no:
Original Language Version CX313.V2 Issue 1 31/07/19