Mitsubishi Electric AH-1006S-E Operating And Installation Instructions

Air Conducting Fan
MODEL
AH-1006S-E
AH-1509S-E
AH-2009S-E
AH-3009S-E
OPERATING AND INSTALLATION INSTRUCTIONS
For users
Carefully read this manual before use for safe and correct operation.
After reading this manual, keep it in a place where any person using the product can refer at anytime.
For dealers
• Carefully read this manual before work for safe and correct installation.
• Installation must be made by the dealer or qualified contractor.
• This product is for indoor use. Do not install the product in a place where it may be exposed to rain.
• After completing installation, be sure to give this manual to the user.
Safety Precautions
• The following symbols denote the type and degree of danger resulting from incorrect handling.
WARNING
Do not install the product where
explosive gas or dust is being, or
could be, emitted.
Prohibited It could induce explosion or fire.
Refrain from immersing in water or
splashing the product with water.
Failure to heed this warning could
No water
result in short circuit or electric shock.
exposure
Do not modify or disassemble the
product.
Failure to heed this warning could
No
result in fire, electric shock or injury.
disassembly
Do not poke your fingers or any objects
into the air outlet or moving parts during
operation since this is dangerous.
You may injure yourself.
If operation stops while the power
is still switched on, do not touch the
product under any circumstances.
Do not touch
There is a danger that the unit could suddenly
start operating again and cause injury. There
is also a danger of electrical shock.
Make sure to ground and install an
all-pole isolator securely.
If a malfunction or current leakage
Check
occurs, electric shock could result.
grounding
Incorrect handling could cause serious injury or death.
Instruction Maual
Report No. 295976 (1 of 7 pages)
Operate the product at the rated
voltage and rated frequency.
Otherwise, fire or electric shock could result.
When power supply cable passes through
metal or wire lath in the wall, securely
prevent the cable from contacting to them.
Ignition may occur if power leaks.
Make sure to turn off the circuit
breaker before maintenance.
There are risks of electrical shock or injury.
If power fails, be sure to turn off the product.
Injury could result if the product operates
Follow
suddenly at restoration of power.
instructions
Since the product is designed to
be installed at a higher location,
install the product at least 2.3 m
above the floor.
Failure to heed this warning could result in injury.
If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
Do not touch the moving parts.
You may injure yourself.
Beware of the
rotating parts
1
1511876HD8301