Page 1
Fix the grommet tightly then into the terminal block; tighten the screws as shown 松开所示压线板的螺钉 将防水接头帽拧紧 将电源线穿过防水接头,压线板,然后插入接线座;再把图示 的五颗螺钉拧紧 6mm≤¢≤10mm External cable/外部接线: 60245IEC57 3x1.0mm Philips Lighting Luminaires (Shanghai) Co., Ltd. Address: No. 2688, Huyi Road, Jiading, Shanghai, China Postalcode: 201801 飞利浦灯具(上海)有限公司 地址:中国上海市嘉定区马陆镇沪宜公路2688号 邮编:201801...
Page 2
Making conTempo ready for use安装使用 1 Close the glass gently 2 Press the four clips onto 3 Fix the bracket tightly onto 4 Bind the power cord as 将玻璃小心地盖上 their initial locations a suitable firm base by 3 bolts shown 将四个搭扣扣回原来位置...