HP RK906 User Manual

HP 2.4GHz Wireless Trackball Keyboard
Important Information
For Windows® XP , Windows® Vista and Windows® 7 operating system, you
can use the keyboard immediately after plugging the dongle (receiver) into the USB
port.
Hardware Installation
1. Plug in the dongle into your available USB port.
2. Make sure the batteries of the keyboard is installed correctly. Please follow the
polarity signs in the battery compartment.
3. Please make sure the power switch on the back of the Keyboard is switched to
"ON" before using the Keyboard. When not in use, please turn the power switch to
"OFF" for power saving.
ID Pairing Procedure
Keyboard mouse and dongle has paired when ship out. If it can't work, please follow
the steps to process the ID pairing procedure.
1. ID pairing/connect button location:
Keyboard ID pairing/connect button on the bottom of the keyboard.
2. After you plug the dongle into the USB port, please hold the keyboard close to the
dongle within 0.5M and press the "
3. If ID pairing is successful, the LED on the dongle will bright 3 seconds.
4. If ID pairing is fail, please follow the steps above to pair ID.
Note:
-Make sure your PC is ON and running when doing the pairing procedure.
-You don't have to pair ID again after changing batteries. If it can't work, please follow
the steps above to pair ID.
2.4G Dongle
(RK906、RX906)
User Manual
" button over 5 second.