Page 2
I N S T R U C T I O N S F O R : MW140.V2, MW140PLUS, MW150, MW170 Thank you for purchasing a Sealey Welder. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance.
With the exception of a metallic workbench, DO NOT connect the work clamp to a metal structure which is not part of the workpiece, as this will jeopardise weld quality and may be dangerous. MW140.V2, MW140PLUS, MW150, MW170 - 1 - 110303...
3. SOFT: To weld with soft electrodes (rutile, inox etc.). Electrode Diameter (mm) Welding Current (Amp) Models MW140.V2 & MW140PLUS: Green LED, mains power indicator, machine ready (fig. 5). 4.2. WELDING CURRENT 1.6 .....25 ..50 The welding current must be regulated according to the diameter of the electrode in use (see 2.0 .
However, metallic components bonded to the workpiece will increase the risk that the operator could receive a shock by touching these metallic components and the electrode at the same time. The operator should be insulated from all such bonded metallic components. MW140.V2, MW140PLUS, MW150, MW170 - 1 - 110303...
Page 6
93/68/EEC CE Marking Directive For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Welders. NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.