Sealey SA607 Instructions

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH
IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE OR PERSONAL INJURY AND WILL INVALIDATE THE
WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
3 Follow all workshop safety rules, regulations, and conditions when using wrench.
p WARNING! Disconnect from air supply before changing accessories or servicing.
3 Maintain the wrench in good condition and replace any damaged or worn parts. Use
genuine parts only. Non-authorised parts may be dangerous and will invalidate the warranty.
p WARNING! Check correct air pressure is maintained and not exceeded. We recommend 90psi.
3 Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each
use and ensure
3 Only use impact sockets which are specifically designed for use with a ratchet wrench.
3 Wear approved safety eye/face shield, ear defenders, and hand protection.
3 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
3 Keep children and non essential persons away from the working area.
7 DO NOT use the wrench for a task it is not designed to perform.
p WARNING! DO NOT use wrench if damaged or thought to be faulty. (Contact Service Agent).
7 DO NOT use wrench unless you have been instructed in its use by a qualified person.
7 DO NOT expose the comfort grip to excessive heat.
7 DO NOT carry the wrench by the air hose, or yank the hose from the air supply.
7 DO NOT operate wrench if you are tired, under the influence of alcohol, drugs or intoxicating
medication.
7 DO NOT carry wrench with your hand on the power trigger in order to avoid unintentional starting.
7 DO NOT direct air from the air hose at yourself or others.
3 When not in use disconnect from air supply and store in a safe, dry, childproof location.
2. INTRODUCTION & SPECIFICATIONS
Feature packed air ratchet wrench. Composite air motor jacket reduces hand-chill and provides extra grip
for comfort and control. Unique design ratchet head is stronger than traditional ratchet style - reduce
damage to the tool by over-torque. Grease fitting on ratchet head allows smoother operation and longer
working life. Safety trigger device.
IMPORTANT WARRANTY INFORMATION
The ratchet heads are supplied fitted with a rubber boot to provide some protection from impact. Because it is
possible to break the head by dropping and also by excessive hand force, we do not warranty ratchet heads. The
rest of the product is covered by a 1 year parts and labour warranty. This does not affect your statutory rights.
MODEL. . . . . . . . . . . . . . . . . . . . . . SA607
Drive size . . . . . . . . . . . . . . . . . . . . 3/8"Sq
Max torque . . . . . . . . . . . . . . . . . . . .50ft/lb
Air consumption . . . . . . . . . . . . . . . . 4cfm
Operating pressure. . . . . . . . . . . . . . 90psi
Air inlet size . . . . . . . . . . . . . . . . 1/4" BSP
Weight . . . . . . . . . . . . . . . . . . . . . . . 1.2kg
Noise Power . . . . . . . . . . . . . . . . . . 87dB.A
Noise Pressure. . . . . . . . . . . . . . . . 98dB.A
INSTRUCTIONS FOR:
AIR RATCHET WRENCH
MODEL No's:
that all connections are secure.
SA607 & SA608
MODEL. . . . . . . . . . . . . . . . . . . . . . SA608
Drive size . . . . . . . . . . . . . . . . . . . .1/2" Sq
Max torque . . . . . . . . . . . . . . . . . . . .50ft/lb
Air consumption . . . . . . . . . . . . . . . . 4cfm
Operating pressure. . . . . . . . . . . . . . 90psi
Air inlet size . . . . . . . . . . . . . . . . 1/4" BSP
Weight . . . . . . . . . . . . . . . . . . . . . . . 1.2kg
Noise Power . . . . . . . . . . . . . . . . . . 87dB.A
Noise Pressure. . . . . . . . . . . . . . . . 98dB.A
Original Language Version
SA607, SA608 Issue: 3 - 16/11/10