Sealey TW16500/12 Instructions

TW16500/12, TW16500/24, TW25000/12 & TW25000/24.
Models:
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
F
WARNING! Winch is not designed for lifting or slinging loads. It is intended only for pulling a load and must be used with care.
p
! The winch is designed to take the strain of a load as a temporary manoeuvre and should not be used to hold or secure a load
when winching has been completed.
! Fit only appropriately rated cable and hook-up suitable for the task for which the winch is to be used.
! Ensure the winch is maintained in a safe working condition. Inspect the cable regularly checking for fraying, kinks, broken
strands or distortion. If such appears, replace the cable. Check all component parts, do not use if damaged, contact
authorised service agent.
! Choose an appropriately strong winching point, which we recommend is reinforced with steel plates and appropriate securing
bolts. The winch mounting point must be capable of withstanding loads greater than the maximum rated capacity of the winch.
! Ensure the winch is protected from the elements. DO NOT allow the winch or the switch unit to become wet.
! Ensure you plug the remote control switch into the winch before the power supply cable.
! Ensure the winch is correctly connected to a 12V or 24V power supply according to the model in use.
! Ensure connection to battery is undertaken in accordance with the safe connecting and handling instructions for the battery.
! Ensure power cables are safely placed away from winch cable and will not be accidentally caught up in the winching process.
! The vehicle from which the battery will be used must be in neutral gear with the hand brake fully on and the wheels chocked.
! Keep the vehicle engine running whilst the winch is being used so that the battery is not drained.
! Check running direction of the winch drum before use.
F WARNING! Keep hands, body and clothing away from the winch components and the cable. Use a rag or protective gloves
p
when handling cable. Take any necessary precautions to protect your personal safety whilst using the winch.
! For a heavy load, place a blanket (or similar) over the extended cable about 2 feet away from the hook in order to lessen the severity
of a cable break.
F WARNING! Ensure you know how much load you are winching. Never exceed the maximum pulling capacity. Take into
p
account any angle of incline over which the load must be pulled and the additional loading when winching from thick mud, or
through snow or water. Chock the wheels of vehicle to be winched then release any brakes and place gears in neutral. Ensure
the load is capable of free movement before winching. Take the strain on cable and remove wheel chocks to move the load.
! Ensure the load to be pulled has an appropriate fixing point. If not, fit an adequate sling, eyebolt or other accessory to the
load. Ensure accessories are equal to, or exceed, winch maximum pulling capacity.
! Ensure cable is securely attached to the load before winching.
! Maintain correct balance and footing whilst using the winch.
! Remove ill fitting clothing. Remove ties, watches, rings and other loose jewellery, and contain
and/or tie back long hair.
! Keep children and non essential persons away from the operating area. Be aware of the
location of other persons assisting you.
! Ensure the winch clutch is tightly closed (by turning clockwise) before attempting to winch.
DO NOT over tighten.
! Should the winch vibrate or emit a noise during use, stop immediately and check to identify
and solve the problem.
% DO NOT operate the winch if any parts are damaged or missing as this may cause failure
and/or personal injury.
% DO NOT disconnect the electrical power supply during winching.
F WARNING! DO NOT use the hand crank to assist the winch in operation as this will damage the
p
winch and may cause personal injury.
F WARNING! DO NOT use winch as a lifting device of any type (fig A). DO NOT use the winch for any purpose
p
other than that for which it is designed.
F WARNING! DO NOT exceed the rated pulling capacity of the winch.
p
% DO NOT pull the the cable at an angle of more than 10
% DO NOT pull cable over or around a corner and DO NOT take hook around load and back onto cable.
Use appropriate sling or pulley if necessary.
% DO NOT operate the winch with less than FIVE wraps of cable on the drum. The end of the cable
is red, do not use with any of the red cable off the drum.
% DO NOT use a cheater bar, or any additional leverage on the crank handle when manually winching.
% DO NOT operate winch if you are tired, under the influence of alcohol, drugs or intoxicating medication.
! When not in use, disconnect winch from power supply and store remote control and power cable in a safe, dry location.
p p p p p p
INSTRUCTIONS FOR:
12 & 24V ELECTRIC POWER WINCH
(fig B).
o
TW16500/12, TW16500/24, TW25000/12 & TW25000/24 - 0016 - (1) - 010900
Fig A
Fig B