Page 1
Form No. 3396-148 Rev B Stake Down Guards 4045 Directional Drill Model No. 23807 Model No. 23807E Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm.
Page 2
8. Loosely install the assembly to the frame using 5 bolts (M8-1 1/4 x 35 mm) as shown in Figure Preparing the Machine and Installing the Left Guard Parts needed for this procedure: Proximity-sensor cap Guard cover Guard-support bracket U-nut Bolt (M8-1 1/4 x 35 mm) Left guard Figure 2...
Page 3
11. Install the guard assembly onto the frame (Figure using 6 bolts (M8-1 1/4 x 35 mm). 12. Torque the bolts to 23 to 29 N-m (17 to 21 ft-lb). 13. Install the left guard assembly using 1 bolt (M8-1 1/4 x Installing the Right Guard 30 mm), 1 locknut (M8), 1 Bolt (M12-1 3/4 x 120 mm), Brackets...
Page 4
Installing the Stakedown Guard Parts needed for this procedure: Stakedown guard Bolt (M8-1 1/4 x 30 mm) Locknut (M8) Figure 6 Procedure 1. Bolt (M12-1 3/4 x 120 mm) 4. Upper bracket, large 2. Bolt (M8-1 1/4 x 30 mm) 5.