Motorola SONIC SUB 500 Quick Start Manual

MODEL: SONIC SUB 500
Frequency Band: 2.402 -2.480 GHz
Maximum RF Power: 4dBm
Working temperature: -10oC -45 oC
1 key feature
size: 75 x 200mm
2 basic operation
Product ID: SP025
FCC ID: VLJ-SP025
IC: 4522A-SP025
EN
Power on/ o
press and hold button 3S to turn ON/OFFand selec
"Sonic Sub 500 " from phone menu.
double-click to enter 2 speaker link mode.
Volume up
short Press to increase volume;
press and hold for 2s to play the next track.
play/pause /BT disconnect
short Press to play /Pause,
Press and hold for 2s to connect /disconnect Bluetooth
double press can start to " Voice Assistant
Volume down
short Press to decrease volume; press and hold it for 2s to
play the last track.
Wireless Chargepad
When Sonic SUB 500 is power on, or in charging with
power supply, put your phone on the product ( center the
phone with the wireless charging symbol on the product) ,
can charge your device .
Type C input
Type C input for power supply , standard input
power is 5V 2A
Single Speaker BT Connection Process
Power on only one speaker. The blue LED will flash when
power is on. Wait until you hear the "Pairing" from the
speaker. Select the model of Sonic Sub you have from the
BT menu to and pair the speaker to your mobile device.
You will hear "Pairing complete" when the speaker
is connected.
Two Speaker Linking Process
Power on both speakers to put them into pairing mode.
Double click the power button on either speaker to enter
link mode. Y ou will hear "Left Channel, Right Channel".
Go to the BT menu on your device and select the model of
Sonic Sub 500 that you have , you will hear "Pairing complete"
when the speaker is connected
If you previously connected one speaker to your phone,
power on the other speaker and after you hear "Pairing"
double click the power button to enter link mode.
"You will hear Left Channel, Right Channel"