NEC DTERM IP Technical Specifications

Network Parameters
Interface
(IEEE 802.3), RJ45
Internet Layer
IP Protocol
Jitter Buffer
Payload Interval
IP Addressing
QoS
Equipment Specification Size (W x D x H)
Tilt up 7.57"x 8.69"x 5.57"
Tilt down 7.57"x 8.69"x 3.80"
(without stand unit)
Weight
Power Specification
External
Inline and Spare Pair
Voltage:
Current:
Power Consumption:
Protocol Support:
Protocol Support (with With ILPA can support
ILPA Integration):
Operating
Temperature
IP Telephony Equipment Requirements
UNIVERGE
NEAX 2400 IPX
NEAX 2000 IPS
Software: 3200 Series R 6.1 or greater
Dterm IP Terminal Specifications
Dterm IP 4D
10/100 base T 10/100 base T
(IEEE 802.3), RJ45 multi-
All Models: IPv4
All Models: NEC Peer-to-Peer (only)
All Models: Max 300msec (10msec steps)
All Models: 10ms ~ 40ms (10ms steps)
All Models: DHCP or Static Assignable
801.p, ToS and Diff-Service
9.09"x 8.54"x 5.28"
9.09"x 8.54"x 4.17"
1.98Ibs
All Models: AC: 24V, Current 750mA
48V
90mA
4.32W
IEEE802.3af
and CDP (DIP Switch)
With ILPA can support
CDP and NDP
All Models: 0 – 40 deg C
Hardware: SV7000T
Software: FP30-100 R16 or greater
Software: FP20-100 R15 or greater
Model: 4
Dterm IP 8D Dterm IP 16D
10/100 base T
(IEEE 802.3), RJ45 multi-
port Switch
9.09"x 9.57"x 5.28"
9.09"x 9.57"x 4.17"
2.51Ibs
48V
92mA
4.42W
IEEE802.3af IEEE802.3af
and CDP (DIP Switch)
With ILPA can support
NDP
All Models
All Models
Models: 8, 16, 32
Software: 3300 Series R8 or greater
port Switch
2.51Ibs
48V
92mA
4.42W
NDP