Page 1
Use position 1 marked with a cross. Use this hole Use position 6 & 8 marked with an arrow. Measured from left to right. Kenwood DDX 7025 We advice to use the following positions. Other positions are also possible. Use position 1 marked with a cross.
Page 2
2-DIN CAW-1142-02 2-DIN 12.301142-02 Remove the screws at the location of the Use a plastic wig te remove the panel arrows. Remove the metal ring. surrounding the gear lever. Gently remove the silver trim. This is Place the metal bracket and tighten the tighten by a click system four screws.