Sony Ipela PCS-XG100 Installation Manual

HD Visual Communication System
PCS-XG100/XG77/XG100S/XG77S

Installation Guide

Connections
1) Supplied
2) Supplied (two PCS-A1 microphones are supplied with the
PCS-XG100/XG100S, and one is supplied with the PCS-XG77/XG77S)
3) Supplied with the PCS-XG100/XG77
4) Supplied (Japan only)
5) Not supplied
Output to HDMI monitors under default settings. When outputting to a non-HDMI monitor,
6)
refer to the "To change the 'Monitor Output' setting" section on the reverse side.
Front
LAN1-ALERT-LAN2 ONLINE
Notes
ˎ
The PCS-XG77/XG77S is not equipped with the following connectors
and indicators:
HDMI IN, HDMI-2 OUT, and 2 connectors, and LAN 2 ALERT indicator
ˎ
On the PCS-XG77/XG77S, the 1 connector is named the
connector, and the LAN 1 ALERT indicator is named the LAN ALERT
indicator.
ˎ
Normally, connect the UTP cable to the 1 connector (indicated in
green). If the UTP cable is connected to the
functions of the system may be restricted.
For details, refer to the Operating Instructions supplied with the system.
ˎ
The REC OUT jack is used to make an audio recording of a
communication, for example. It is not used during regular
communication.
ˎ
We recommend using Sony's HDMI cable.
© 2013 Sony Corporation
Printed in China
4-455-814-13 (1)
1080 60P
to
(USB) port
Pen tablet
(Wacom)
TV monitor
2 connector, some of the
SRG-120DH
HD Camera Unit
to HDMI to VISCA to DC 12V
IN
Camera cable 1)
VCR, etc.
HDMI
cable
5)
to CAMERA to HDMI IN
Rear
CAMERA
DVI-I 1 DVI-I 2(PC)
I HDMI
N
O
U
T
DVI-I OUT
HDMI-1 HDMI-2
to HDMI-1 to DVI-I
OUT OUT
DVI cable
5)
5)
5) 6)
Projector, etc.
HDMI cable 1)
to HDMI IN
Notes
ˎ
Be sure to turn off all the equipment before making any connections.
3)
ˎ Do not connect/disconnect the camera cable, interface cable, or pen
tablet with the power on. Doing so may damage the camera unit,
Communication System, or ISDN unit.
ˎ
For safety, do not connect the 1000BASE-T connector to a network
that will apply excess voltage to this connector.
ˎ
When used with an ISDN unit for the first time,
Communication System may automatically upgrade the software
of the connected equipment. Follow the instructions on the
monitor screen to upgrade the software. Do not turn off the
Computer
Communication System or disconnect the cable during upgrade.
Doing so may cause a malfunction of the system.
ˎ ISDN support is planned for version 2.0.
PCS-A1 microphone
DVI cable
5)
Connecting two microphones allows pickup
of stereo sound.
to DVI-I 2
to MIC (A1) 1 (R) / 4 (L)
(PC) IN
MIC(A1)
1(R) 2(R) 3(R) 4(L) 5(L) 6(L)
R L R L R L R L
AUDIO 1 IN AUDIO 2 IN AUDIO OUT REC OUT
1
2 ISDN UNIT AUX CONTROL MAINTENANCE
to ISDN UNIT to DC 19.5 V
to 1
Interface
cable
(supplied
PCSA-B384S
with ISDN
unit)
to ISDN 1 to 3
to TERMINAL PCSA-B768S
to ISDN 1 to 6
ISDN unit
5)
ISDN modular cable
UTP cable (category 6,
straight)
5)
LAN
the
2)
Power cord 4)
to power outlet
AC adaptor 1)
5)
or
5)
ISDN
line
5)
Continued on
reverse side