D-Link DCS-1000W Setting-Up Manual page 6

These fields control Input Trigger 1 and Trigger
2. Each Input trigger can trigger either or both
Output triggers.
SMTP Server Address: Name or IP address of a
SMTP Mail Server that the camera can send images to.
Sender E-Mail: Name of the Camera/Trigger that
sent the mail
Receiver E-Mail: Account Name of person to receive
pictures when sensors are activated
Sending Interval: The time between additional
sequences of pictures are taken when sensors
activated
Sending Times: The number of times the camera
takes additional sequences of pictures based on
Sending Interval.
Trigger I/O: Enable Output trigger for the specified
input trigger
Output # Time: How long the output trigger is
activated if Sensor is activated. (i.e.. How long should
siren ring?)
Security Notification Configuration
I/O Input Trigger 1
I/O Input Trigger 2
6