Disconnecting The Usb Cable - JVC LYT1155-001A Installation Manual

Disconnecting the USB Cable

Before replacing memory cards or turning off the PC, first disconnect the USB cable and turn off the
camcorder.
1
Confirm that the message [ACCESSING FILES] is not currently displayed on the camcorder's
LCD monitor.
● If the message [ACCESSING FILES] is currently displayed, wait until it disappears before proceeding.
2
Double-click the [Safely Remove Hardware] icon
in the status bar.
The [Safely Remove Hardware] dialog box appears. if
not, wait a while then go to step 5.
3
Select [USB Mass Storage Device], and then click
[Stop].
The [Stop a Hardware device] dialog box appears.
4
Click [OK].
● A message indicating that the device can be safely
removed appears.
5
Disconnect the USB cable.
6
Set the camcorder's Power Switch to "OFF".
The camcorder turns off.
The model name depends on the connected
camcorder.
The model name depends on the connected
camcorder.
— 13 —