Storing Channels In Memory(Optional) - Toshiba 65L7300U User Manual

6 Settingup yourTV
Storing channels in memoty (optiona
3 Press the A/V (arrow) buttons to select Antenna or Cable.
4 Press the OKbutton.
5 Select Start Scan.
After scanning is complete, the auto tuning results screen will
appear.
6 Press the OK or EXIT button.
Storing channels in memory(optional)
To make sure your TV stops only on the channels you want when you press
the CH A/V buttons on the remote control or the control panel, store
those channels in the TV's memory.
Auto Tuning
NOTN
Youmustsetup theantenna/cable inputsourcefirst. See"Initialsetup"on
page 52.
You can set up the TV to detect all active channels in your area and store
them in its memory. Then you can manually store or skip individual
channels from memory.
Option: Description:
Cable Note:If youselect C able, a utotuningdeletes previously stored channels
frommemory.
Thissetuprequires some time,butyoudo notneed to repeat thesetup
unless yourcableTVservice's l ineupchanges significantly.
Antenna Toskipan antenna source channel a ndremove it frommemory, s etthe
channel t o beskipped. S ee"Skippingchannels" o n page 67.
NOTN
To tuneto channels not storedin memory, u sebuttons0-9 andthe DASH
buttonon theremote control.
1 Press the SETUP button.
2 Select Installation > Channel Tuning > Auto Tuning, and then
press the OK button.
A confirlnation screen appears.
3 Press the OK button to start Auto Tuning or press EXIT button to
abort.
The TV cycles through the channels and stores all active channels
in melnory.