Connectinga Digital Audiosystem - Toshiba 50L2300U User Manual

4 Connecting YourW
Connecting a digital audio system
Vide pa_d
Pla_a¢t_ de'Ace (HQM]
TM
CEC DVO Flayed, el©.l
Playback device (HOMI
TM
CECDVD Player, el©.)
(Sample Illustration) 58L1350U--HDMF MCEC compatible audio
receiver and playback device connections
To connect an HDMI
TM
device, you will need one HDMI
TM
cable
(type A connector) per HDMI
TM
device (see "Overview of cable
types" on page 23)
NOTE -:- If several devices areconnected, HDMI
T M
CEC Control f eature
maynotoperate p roperly.
o:o Forproper o peration, it isrecommended thatyouuseanHDMI
T M
cable withtheHDMI
TM
Logo (_H__m_!').
Before controlling the device(s):
•:° After completing the above connections, configure the HDMI
TM
CEC Setup menu with the desired settings, see "Setting up
HDMI
TM
CEC" on page 101
÷:° The connected devices must also be configured. For details, see
the operation manual for each device.
o1. This feature uses the CEC technology as regulated by the
HDMI
TM
standard.
This feature is limited to models incorporating Toshiba's
HDMI
TM
CEC. However, Toshiba is not liable for those
operations. Refer to the individual instruction manuals for
compatibility information.
Thisfeature maynotworkproperly depending onthedevices thatare
connected.
NOTE
Connecting a digital a udio system
The TV's DIGITAL AUDIO OUT terminal outputs a Dolby ®
Digital or 2-channel down-mixed PCM (pulse-code modulation)
signal for use with an extemal Dolby ®Digital decoder or other