Selecting A Base Unit; Using Multiple Handsets - Silvercrest COCOON 1400 User Manual

Cocoon 1400
8.3

Selecting a base unit

If your handset is registered to several base units (maximum of 4), you must select one of
these base units because the handset only communicates with one base unit at a time.
There are two options:
8.3.1 Automatic selection
If you set the handset to automatic selection, the handset will automatically choose the
closest base unit in standby mode:
1. Press 2
2. Press 3 or
3. Press
2
• Press or
3
4. Press
2
5. Select 'Auto' and press
Info
8.3.2 Manual selection
If you set the handset to 'manual selection', the handset will only search for the base unit you
have set.
1. Press 2
2. Press 3 or
3. Press
2
4. Press 3 or
5. Press
2
6. Select 'Manual' and press
7. Select the base unit using
Important
8.4

Using multiple handsets

Info
8.4.1 Calling another handset
1. Press INT .
13
• 'Internal' appears in the display.
2. Select the number of the handset (keys 1-5) you wish to call.
3. When you have completed your call, press
.
11 repeatedly, select 'Handset'.
to confirm.
repeatedly, select 'Select Base'.
11
to confirm.
to confirm.
2
When you have activated Automatic base selection and the handset
is out of range on the current base, the handset will only search for
the strongest base in standby (not during communication).
.
11 repeatedly, select 'Handset'.
to confirm.
repeatedly, select 'Select Base' .
11
to confirm.
2
or
3
The handset must be registered to a base unit before you can select
that base unit.
The functions described below are only possible if more than one
handset is registered to the base unit.
Additional handsets and base units
to confirm.
and press
11
to hang up.
5
to confirm.
2
29