Personal Identification Number - Panasonic KX-TDA200 Programming Manual

4.
Click Close.
If the PS is successfully de-registered, the status of the PS will update to show "None".
Forced De-registration
Follow the steps below to forcibly de-register the PS when normal de-registration has been unsuccessful or
de-registration has been performed only on the PS.
1.
Click Forced De-registration.
A dialog box will appear. Registered extension numbers are displayed on the left.
2.
Highlight numbers and click the right arrow to select them for forced de-registration. Click Next.
A dialog box will appear.
3.
Click OK.
A dialog box will appear.
4.
Click Confirm.
•
If the de-registration is successful, the dialog box will show "Forced De-registration Succeed".
5.
Click Close.
Once the PS is successfully de-registered, the status of the PS will update to show "None".

Personal Identification Number

Specifies the Personal Identification Number (PIN) of the PBX, used to avoid registering a PS to the wrong
PBX.
Note that the same PIN should be entered at the PS, before the PS is registered to the PBX.
Default
1234
Value Range
4 digits (consisting of 0–9)
Maintenance Console Location
3.34 [1-2] Portable Station
Installation Manual References
For KX-TDA50:
2.7.7 Connecting a Cell Station to the PBX
2.8.7 Connecting a Cell Station to the PBX
For KX-TDA100/KX-TDA200:
2.8.7 Connecting a Cell Station to the PBX
For KX-TDA600:
2.10.7 Connecting a Cell Station to the PBX
2.11.7 Connecting a Cell Station to the PBX
Programming Manual References
None
Document Version 2008-11
3.34 [1-2] Portable Station
PC Programming Manual 229