Mitsubishi Electric PURY-P200YLM-A(1) Service Handbook page 188

[6-7 Test Run Method ]
(3) Entering the maintenance information
Model name, serial number, and dealer's phone number can be registered to the remote controller to be displayed on the screen when an error
occurs.
Step 1: Switching the remote controller screen to "Maintenance information" (Requires the maintenance
password. This screen is not accessible while the controller is under centralized control.)
1
On the Service Menu screen, select "Input maintenance
info." and press the button.
2 Select "Model name input" and press the
Step 2: Selecting the outdoor unit address and indoor unit address information to be resistered
1 Select the address to be registered, using the F1 and F2 buttons, and then press the
Address: 0-255
Step 3: Registering the model name
1 Enter the model name. The character string can be up to 18 characters in length.
Move the cursor left with the F1 button, and right with the F2 button.
Select a character with the F3 and F4 buttons.
Press the button when done entering characters. The screen will return to the one
shown in Step 2.
Repeat Steps 2 and 3 until all the model names of the units at the selected addresses have been entered. To change the address,
press the button on the screen shown in Step 3 to return to the screen shown in Step 2, and then change the address. After
changing the address, enter the model name.
Tips: the model name information of the unit at a given address can be copied and pasted to another unit at
a different address.
Press the F3 button in Step 2 to copy the model name information of the unit at the selected address.
Press the F4 button in Step 2 to overwrite the model name information of the unit at the selected address.
Step 4: Registering the serial number
1
Select "Serial No. input" in Step 1-2 above, and then press the
button.
Register the serial number by following steps 2 and 3 above.
2
The serial number can be up to 8 characters in length.
Step 5: Entering your dealer's phone number
1
Select "Dealer information input" on the Maintenance information
screen, and press the button.
Press the button when "Dealer information" appears.
2
3
Enter your dealer's telephone number.
Telephone number can be up to 13 characters.
Move the cursor left with the F1 button, and right with the F2 button.
Select a character with the F3 and F4 buttons.
Press the button when done entering characters.
HWE1314A
1
button.
1
1
- 177 -
Service menu
2
Test run
Input maintenance info.
Check
Self check
Main menu:
Cursor
F1 F2 F3 F4
button.
1
1
Cursor
Maintenance information
2
Model name input
Serial No. input
Dealer information input
Initialize maintenance info.
Service menu:
Cursor
Maintenance information
2
Model name input
Serial No. input
Dealer information input
Initialize maintenance info.
Service menu:
Cursor
3
Cursor
Maintenance information
Model name input
Serial No. input
Dealer information input
Initialize maintenance info.
Service menu:
Cursor
F1 F2 F3 F4
Model information
Add.
Input:
Address Copy
Model registration
Add.
Select:
Cursor Letter
Serial No. registration
Add.
Select:
Address Copy
Dealer information
Dealer
Tel
Input:
Dealer information
Dealer
Tel
End:
Cursor
Letter
GB