HP C410 series User Manual page 179

7. (Optional) Connect a phone to the other open phone port on the parallel splitter.
Figure 12-13 Back view of the product
8. Now you need to decide how you want the product to answer calls, automatically
or manually:
•
•
9. Run a fax test.
If you pick up the phone before the product answers the call and hear fax tones from
a sending fax machine, you will need to answer the fax call manually.
Downloaded from ManualsPrinter.com Manuals
1 Telephone wall jack
2 Phone cord connected to the 2-EXT port
3 Parallel splitter
4 Telephone (optional)
5 Computer with modem
6 Phone cord supplied in the box with the product connected to the 1-LINE port
If you set up the product to answer calls automatically, it answers all
incoming calls and receives faxes. The product will not be able to distinguish
between fax and voice calls in this case; if you suspect the call is a voice call,
you will need to answer it before the product answers the call. To set up the
product to answer calls automatically, turn on the Auto Answer setting.
If you set up the product to answer faxes manually, you must be available to
respond in person to incoming fax calls or the product cannot receive faxes.
To set up the product to answer calls manually, turn off the Auto Answer
setting.
Fax troubleshooting 177