Interface Setup - Canon iPF720 User Manual

Control Panel

Interface Setup

EOP Timer
TCP/IP
NetWare
AppleTalk
Ethernet
Driver
Ext. Interface
Return Defaults
58 Printer Parts
Downloaded from ManualsPrinter.com Manuals
Setting Item
IP Mode
Protocol DHCP
BOOTP
RARP
IP Setting IP Address
Subnet Mask
Default G/W
NetWare
Frame Type
Print Service
Auto Detect
Comm.Mode
Ethernet Type
Spanning Tree
MAC Address
Description, Instructions
Specify the timeout period before cancellation of print jobs
that cannot be received by the printer.
Choose whether the printer IP address is congured
automatically or a static IP address is entered manually.
Specify the protocol used to congure the IP address
automatically.
Specify the printer network information when using a static
IP address.
Enter the IP address assigned to the printer, as well as the
network subnet mask and default gateway.
Specify the NetWare protocol. To apply your changes,
choose Register Setting.
Specify the frame type to use.
Choose the print service.
Specify whether to use the AppleTalk protocol. To apply
your changes, choose Register Setting.
Specify the communication method. To apply your
changes, choose Register Setting.
Choose On for automatic conguration of the LAN
communication protocol. Choose Off to use settings values
of Comm.Mode and Ethernet Type.
Choose the LAN communication method.
Choose the LAN transfer rate.
Choose whether spanning-tree packets are supported over
the LAN.
Displays the MAC address.
Choose the expansion interface.
Return Defaults/Execute? is displayed if you press the
▼ button. Choose OK to restore the network settings to
the default values.