3. HARDWARE SETUP
Motherboard Features Settings (DIP Switches - SW1)
The motherboard's onboard functions are adjusted through the DIP switches. The
white block represents the switch's position. The example below shows all the
switches in the OFF position.
A7V133-M
A7V133-M DIP Switches
1) Jumper Setting (JEN)
This jumper is factory set for the default [1-2]. This default enables Jumper
mode. The default setting allows changes to frequencies to be made with the
DIP switches. Note that the position of this jumper must not be changed.
Setting
Jumper Mode
A7V133-M
A7V133-M JumperFree™ Setting
ASUS A7V133-M User's Manual
SW1
1. Frequency Selection
2. Frequency Selection
3. Frequency Selection
4. Frequency Selection
5. Frequency Selection
JEN
[1-2] (default)
JEN
1 2
Jumper Mode
(Default)
17