Table of Contents
Advertisement
2.2.3
TITLE DIS： when it is set at ON, the title of the preset position can be displayed on the left side of the
screen when calling the preset position, such as "NO.001 ABCDEFGH". If no title of the position, then
only "NO. 001" is displayed. The modification of the title of the preset position can be set at the
PROGRAM option on the menu.
2.2.4
TITLE POS： To set the display position of the title of the preset position from the 1st line to the 10th
line. The 1st line is at the top of the screen.
2.2.5
CAM DISPLAY： when it is set at ON, the display of the camera itself can be opened.
2.2.6
RETURN： To return to the main menu.
2.3
CAMERA SETUP
2.3.1
SLOW SHUTTER： frame accumulation function with options of
manual/automatic. Under automatic state when the display of the
camera is opened, ASS shall be displayed on the screen.
2.3.2
BACK LIGHT： backlight compensation open/close.
2.3.3
ICR SHOT： low illumination. ON – manual / AUTO – automatic.
2.3.4
IRIS：To set up automatic iris. AUTO – automatic / MANU – manual.
2.3.5
D-ZOOM：To set up digital zoom. ON – open / OFF – close.
2.3.6
FOCUS： To set up automatic focusing. AUTO – automatic / MANU
– manual.
2.3.7
WB SET： ATW / INDOOR / OUTDOOR / ONEPUSH / AUTO /
MANU.
2.3.8
MENU OF CAM： this option is empty.
2.3.9
RETURN： To return to the main menu.
2.4 CONTROL SETUP
2.4.1
ALARM： ON/OFF: Turn on or Turn off the alarm input function.
2.4.2
HOME OPTION： To enter into the sub-menu of automatic home
function.
2.4.2.1
AUTO HOME： When it is set at ON, the automatic home is
opened. It means if the user has no any function in a period of
time, the pan/tilt shall return home (HOME). The pan/tilt couldn't
return home automatically if the pan/tilt is at patrol state. If no
home returning is needed when the pan/tilt is under stop state, set
this option at OFF.
2.4.2.2
HOME POS： HOME is the returning position. If some scene is
needed to set as HOME, call this scene on the camera and set it as the preset position 3, then call up the
menu and enter into this sub-menu, and change the figure after HOME POS into 3. If you need to
activate the automatic home, do not forget to set AUTO HOME at
ON. HOME POS can be preset positions from 1 to 50.
2.4.2.3
DWELL TIME： To set the time of automatic home, that is, if no
control within the set time, it shall return home. The time can be
from 1 to 99 minutes.
2.4.2.4
RETURN： To return the menu one level upward.
2.4.3
IR_LED：The default option on the menu of the infrared lamp is
OFF. Normally the system detects external illumination and opens/closes the infrared lamp automatically.
If the user changes the option of the infrared lamp into ON by the menu, the infrared system is changed
４
C O N TR O L SETU P
1. A LA R M
O N
2. H O M E O PTI O N
3. I R _LED
O FF
4. W I PER
O FF
5. W I PER M O D E
6. D EFO G G ER
O FF
7. R ETU R N
H O M E O PTI O N
1. A U TO H O M E
O N
2. H O M E PO S
01
3. D W ELL TI M E
05 M I N
4. R ETU R N
Advertisement
Table of Contents
