Panasonic PT-DZ21K2 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Projector
  5. PT-DZ21K2
  6. Operating instructions manual

Panasonic PT-DZ21K2 Operating Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Thank you for purchasing this Panasonic product.
■ This manual is common to all the models regardless of suffixes of the Model No.
z for India
PT-DZ21K2D / PT-DS20K2D / PT-DW17K2D / PT-DZ16K2D
z for other countries or regions
PT-DZ21K2 / PT-DS20K2 / PT-DW17K2 / PT-DZ16K2
■ Before operating this product, please read the instructions carefully and save this manual
for future use.
■ Before using this product, be sure to read "Read this first!" ( x pages 5 to 14).

Operating Instructions

DLP™ Projector
Model No.
The projection lens is sold separately.
Functional Manual
Commercial Use
PT-DZ21K2
PT-DS20K2
PT-DW17K2
PT-DZ16K2
ENGLISH
TQBJ0889-1

Advertisement

Table of Contents
loading

Related Manuals for Panasonic PT-DZ21K2

Summary of Contents for Panasonic PT-DZ21K2

  • Page 1: Operating Instructions

    India PT-DZ21K2D / PT-DS20K2D / PT-DW17K2D / PT-DZ16K2D z for other countries or regions PT-DZ21K2 / PT-DS20K2 / PT-DW17K2 / PT-DZ16K2 ■ Before operating this product, please read the instructions carefully and save this manual for future use.

  • Page 2: Table Of Contents

    Contents Contents Read this first! Projecting Selecting the input signal Adjusting the focus, zoom, and shift Chapter 1 Preparation Adjusting the lens position and focus when the fixed-focus lens (Model No.: ET-D75LE90) is Precautions for use used Cautions when transporting Setting the lens position Cautions when installing Adjustment range by the lens position shift...
  • Page 3 Contents [ADVANCED MENU] menu [PROJECTOR SETUP] menu [DIGITAL CINEMA REALITY] [PROJECTOR ID] [BLANKING] [PROJECTION METHOD] [INPUT RESOLUTION] [LAMP SELECT] [CLAMP POSITION] [LAMP RELAY] [EDGE BLENDING] [BRIGHTNESS CONTROL] [FRAME RESPONSE] [STANDBY MODE] [FRAME CREATION] [SCHEDULE] [FRAME LOCK] [INITIAL STARTUP] [RASTER POSITION] [STARTUP INPUT SELECT] [RS-232C] [DISPLAY LANGUAGE] menu...
  • Page 4 Contents [NETWORK] menu [DIGITAL LINK MODE] [DIGITAL LINK SETUP] [DIGITAL LINK STATUS] [NETWORK SETUP] [NETWORK CONTROL] [NETWORK STATUS] [DIGITAL LINK MENU] [Art-Net SETUP] [Art-Net CHANNEL SETTING] [Art-Net STATUS] Network connection Connecting to a twisted-pair-cable transmitter Accessing from the web browser Chapter 5 Maintenance Lamp/temperature/filter indicators...

  • Page 5: Read This First

    Read this first! Read this first! WARNING: THIS APPARATUS MUST BE EARTHED. WARNING: To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or moisture. This device is not intended for use in the direct field of view at visual display workplaces. To avoid incommoding reflexions at visual display workplaces this device must not be placed in the direct field of view.
  • Page 6 This product has a High Intensity Discharge (HID) lamp that contains mercury. Disposal may be regulated in your community due to environmental considerations. For disposal or recycling information, please visit Panasonic website: http://www.panasonic.com/environmental or call 1-888-769-0149. NOTIFICATION (Canada) This class A digital apparatus complies with Canadian ICES-003.
  • Page 7 Read this first! FCC NOTICE (USA) Verification Model Number: PT-DZ21K2 / PT-DS20K2 / PT-DW17K2 / PT-DZ16K2 Trade Name: Panasonic Responsible Party: Panasonic Corporation of North America Address: Two Riverfront Plaza, Newark, NJ 07102-5490 General Contact: http://www.panasonic.com/support Projector Contact: http://panasonic.net/avc/projector/ This device complies with Part 15 of the FCC Rules.
  • Page 8 L or colored RED. How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse. Importer’s name and address within the European Union Panasonic Marketing Europe GmbH Panasonic Testing Centre Winsbergring 15, 22525 Hamburg, Germany...
  • Page 9 Read this first! WARNING: r POWER The wall outlet or the circuit breaker shall be installed near the equipment and shall be easily accessible when problems occur. If the following problems occur, cut off the power supply immediately. Continued use of the projector in these conditions will result in fire or electric shock. f If foreign objects or water get inside the projector, cut off the power supply.
  • Page 10 If liquid enters inside of the projector, consult your dealer. f Particular attention must be paid to children. Use the ceiling mount bracket specified by Panasonic. Using the ceiling mount bracket other than the specified one will result in falling accidents.
  • Page 11 Read this first! WARNING: r ACCESSORIES Do not use or handle the batteries improperly, and refer to the following. Failure to observe this will cause burns, batteries to leak, overheat, explode or catch fire. f Do not use unspecified batteries. f Do not charge dry cell batteries.
  • Page 12 Read this first! CAUTION: r POWER When disconnecting the power cord, be sure to hold the power plug and power connector. If the power cord itself is pulled, the lead will become damaged, and fire, short-circuits or serious electric shocks will result.
  • Page 13 Continuous use while dust is accumulated inside the projector may result in fire. f For cleaning fee, ask your dealer. r VIEWING 3D VIDEO (PT-DZ21K2 and PT-DS20K2 only) Those with a medical history of oversensitivity to light, heart problems, or poor physical health should not view 3D images.

  • Page 14: Remote Control Battery

    Read this first! To remove the battery Remote Control Battery 1. Press the guide and lift the cover. 2. Remove the batteries. (ii) Brazil Only Brasil Apenas r Manuseio de baterias usadas BRASIL Após o uso, as pilhas e/ou baterias deverão ser entregues ao estabelecimento comercial ou rede de assistência técnica autorizada.
  • Page 15 rTrademarks f Windows and Internet Explorer are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. f Mac, Mac OS, and Safari are trademarks of Apple Inc., registered in the United States and other countries. f PJLink is a registered trademark or pending trademark in Japan, the United States, and other countries and regions.

  • Page 16: Features Of The Projector

    3. Connect with external devices. technology (x page 52) *1 Only for PT-DZ21K2, PT-DS20K2, and PT-DZ16K2 Easy setup and improved 4. Connect the power cord. serviceability (x page 58) ▶ Inherited the highly flexible installability with the abundant lineup of the optional 5.

  • Page 17: Chapter 1 Preparation

    Preparation Chapter 1 This chapter describes things you need to know or check before using the projector. ENGLISH - 17...

  • Page 18: Precautions For Use

    0 °C (32 °F) and 30 °C (86 °F). (Only for PT-DZ21K2, PT-DS20K2, PT-DW17K2) f Near high-voltage power lines or near motors: Doing so may interfere with the operation of the projector.
  • Page 19 Replacement lamp unit (for portrait mode), install the projector with the terminals surface facing down. (Only for PT-DZ21K2, PT-DS20K2, PT-DW17K2) Do not use the projector tilted to the right and left, front and back. Using the projector at an angle that exceeds 15°...
  • Page 20 Chapter 1 Preparation — Precautions for use Make a clearance of at least 5 mm (3/16") between the projector bottom and the setting surface by inserting spacers (metallic) between them. Adjustable feet Mount Spacer Screw holes for ceiling mount (M6) Adjustable feet Positions of screw holes for ceiling mount and adjustable feet Clearance (5 mm (3/16") or longer)

  • Page 21: Security

    Make your password difficult to guess as much as possible. f Change your password periodically. f Panasonic Corporation or its affiliate companies will never ask for your password directly. Do not divulge your password in case you receive such inquiries.

  • Page 22: Cautions On Use

    3D images (Only for PT-DZ21K2, PT-DS20K2) The projector can display the 3D video signal input in various formats such as “frame packing”, “side by side”, etc. You are required to prepare external devices for viewing 3D images (such as 3D eyewear, video signal output devices) which are suitable for your 3D system.

  • Page 23: Accessories

    Chapter 1 Preparation — Precautions for use Accessories Make sure that the following accessories are provided with your projector. Numbers enclosed in < > show the number of accessories. Wireless/wired remote control unit <1> (K2CZ3YY00058) (N2QAYB001052) (K2CZ3YY00032) Power cord CD-ROM <1> (K2CM3YY00007) (TXFQB02WNLZ) (K2CT3YY00014)

  • Page 24: Optional Accessories

    Ceiling mount bracket Bracket) Frame ET-PFD510 Replacement lamp unit ET-LAD520 (1 pc), ET-LAD520F (4 pcs) Replacement lamp unit (for ET-LAD520P (1 pc), ET-LAD520PF (4 pcs) (Supported only for PT-DZ21K2, PT-DS20K2, portrait mode) PT-DW17K2) Replacement filter unit ET-EMF510 Early Warning Software (Basic license/3-year...

  • Page 25: About Your Projector

    Sets the projector to projection mode when the <MAIN <SLOT2> button are not used with the projector. POWER> switch on the projector is set to <ON> and the power (SDI input is supported only for PT-DZ21K2, PT-DS20K2, and is turned off (standby mode). PT-DZ16K2.) Power standby <v>...
  • Page 26 Chapter 1 Preparation — About your projector Attention f Do not drop the remote control. f Avoid contact with liquids or moisture. f Do not attempt to modify or disassemble the remote control. f Do not swing the remote control holding onto the strap when a strap is attached. f Observe the following instructions that are indicated on the caution label at the back of the remote control: g Do not use old battery with new one.

  • Page 27: Projector Body

    Chapter 1 Preparation — About your projector Projector body Front Side Rear Bottom WARNING Keep your hands and other objects away from the air exhaust port. f Keep your hands and face away. f Do not insert your fingers. f Keep heat-sensitive objects away. Heated air from the air exhaust port can cause burns, injury, or deformations.

  • Page 28: Control Panel

    <SDI 1/2> button Also used to enter a password in [SECURITY] or enter Switches the input to SDI. characters. (Only for PT-DZ21K2, PT-DS20K2, PT-DZ16K2) 16 <LIGHT> switch Input selection terminal indicator This is the lighting switch for the connecting terminals and Indicator that shows the selected input terminal.

  • Page 29: Connecting Terminals

    <SDI IN 1> terminal/<SDI IN 2> terminal These are terminals to connect the remote control for serial These are terminals to input SDI signals. control in a multiple projector environment. (Only for PT-DZ21K2, PT-DS20K2) <REMOTE 2 IN> terminal <RGB 1 IN> terminals (<R/P /VIDEO>, <G/Y>, <B/P /C>,...

  • Page 30: Preparing The Remote Control

    Chapter 1 Preparation — Preparing the remote control Preparing the remote control Inserting and removing the batteries (ii) Fig. 1 Fig. 2 Open the cover. (Fig. 1) Insert the batteries and close the cover (insert the m side first). (Fig. 2) f When removing the batteries, perform the steps in reverse order.

  • Page 31: Connecting The Remote Control To The Projector With A Cable

    Chapter 1 Preparation — Preparing the remote control Connecting the remote control to the projector with a cable If you control the multiple projectors with a single remote control, use commercially available M3 stereo mini jack cables to connect to the <REMOTE 1 IN>/<REMOTE 1 OUT> terminals of the projectors. The remote control is effective even in places where an obstacle stands in the light path or where devices are susceptible to outside light.

  • Page 32: Chapter 2 Getting Started

    Getting Started Chapter 2 This chapter describes things you need to do before using the projector such as the setup and connections. 32 - ENGLISH...

  • Page 33: Setting Up

    METHOD] (x page 126) depending on the installation mode. f For the portrait setting, use the optional Replacement lamp unit (for portrait mode) (Model No.: ET-LAD520P (1 pc), ET-LAD520PF (4 pcs)). (Only for PT-DZ21K2, PT-DS20K2, PT-DW17K2) The PT-DZ16K2 cannot be used with the portrait installation.

  • Page 34: Parts For Ceiling Mount (Optional)

    Chapter 2 Getting Started — Setting up Parts for ceiling mount (optional) The projector can be installed on the ceiling by combining the optional Ceiling mount bracket (Model No.: ET-PKD520H (for high ceilings), ET-PKD520S (for low ceilings)) and Ceiling mount bracket (Model No.: ET-PKD520B (Projector Mount Bracket)).
  • Page 35 Chapter 2 Getting Started — Setting up r For fixed-focus lens (Model No.: ET-D75LE90) Projected image Screen Screen (Unit: m) Projected image height Projected image width Projected image size Projection distance (from the screen to the mirror reflection surface Distance between the projector and the screen (from the screen to the tip of the lens) Distance between the projector and the screen (from the screen to the front surface of the projector) Distance between the projector and the screen (from the screen to the rear surface of the projector) Distance between the projector and the screen (from the screen bottom edge to the projector top)
  • Page 36 Chapter 2 Getting Started — Setting up [GEOMETRY] projection range [VERTICAL KEYSTONE] (viewed from the side) [HORIZONTAL KEYSTONE] (viewed from above) Screen Screen Vertical arc correction (viewed from the side) Horizontal arc correction (viewed from above) Projection distance Projection distance Arc radius Arc radius Screen Screen...
  • Page 37 *1 Only the vertical keystone correction angle can be corrected in the direction in which the projector body moves away from the screen. When using the optional Upgrade Kit (Model No.: ET-UK20) (Only for PT-DZ21K2, PT-DS20K2) Only [KEYSTONE] used [KEYSTONE] and [CURVED] used together...
  • Page 38 Projection distance of each projection lens A ±5 % error in listed projection distances may occur. When [GEOMETRY] is used, distance is corrected to become smaller than the specified image size. For PT-DZ21K2 r When the image aspect ratio is 16:10 (Unit: m)
  • Page 39 Chapter 2 Getting Started — Setting up r When the image aspect ratio is 16:9 (Unit: m) Lens type Zoom lens Projection lens Model No. ET-D75LE6 ET-D75LE10 ET-D75LE20 ET-D75LE30 ET-D75LE40 ET-D75LE8 Throw ratio 0.9-1.1:1 1.3-1.7:1 1.7-2.4:1 2.4-4.7:1 4.6-7.4:1 7.3-13.8:1 Projected image size Projection distance (L) Height Min.
  • Page 40 Chapter 2 Getting Started — Setting up r When the image aspect ratio is 4:3 (Unit: m) Lens type Zoom lens Projection lens Model No. ET-D75LE6 ET-D75LE10 ET-D75LE20 ET-D75LE30 ET-D75LE40 ET-D75LE8 Throw ratio 1.1-1.3:1 1.6-2.0:1 2.0-2.9:1 2.9-5.6:1 5.5-8.9:1 8.8-16.5:1 Projected image size Projection distance (L) Height Min.
  • Page 41 Chapter 2 Getting Started — Setting up For PT-DS20K2 r When the image aspect ratio is 4:3 (Unit: m) Lens type Zoom lens Projection lens Model No. ET-D75LE6 ET-D75LE10 ET-D75LE20 ET-D75LE30 ET-D75LE40 ET-D75LE8 Throw ratio 1.0-1.2:1 1.4-1.8:1 1.8-2.6:1 2.6-5.1:1 5.0-8.0:1 7.9-15.0:1 Projected image size Projection distance (L) Height...
  • Page 42 Chapter 2 Getting Started — Setting up r When the image aspect ratio is 16:9 (Unit: m) Lens type Zoom lens Projection lens Model No. ET-D75LE6 ET-D75LE10 ET-D75LE20 ET-D75LE30 ET-D75LE40 ET-D75LE8 Throw ratio 1.0-1.2:1 1.4-1.8:1 1.8-2.6:1 2.6-5.1:1 5.0-8.0:1 8.0-15.0:1 Projected image size Projection distance (L) Height Min.
  • Page 43 Chapter 2 Getting Started — Setting up For PT-DW17K2 r When the image aspect ratio is 16:9 (Unit: m) Lens type Zoom lens Projection lens Model No. ET-D75LE6 ET-D75LE10 ET-D75LE20 ET-D75LE30 ET-D75LE40 ET-D75LE8 Throw ratio 1.0-1.2:1 1.4-1.9:1 1.8-2.7:1 2.7-5.2:1 5.1-8.2:1 8.2-15.4:1 Projected image size Projection distance (L) Height...
  • Page 44 Chapter 2 Getting Started — Setting up r When the image aspect ratio is 4:3 (Unit: m) Lens type Zoom lens Projection lens Model No. ET-D75LE6 ET-D75LE10 ET-D75LE20 ET-D75LE30 ET-D75LE40 ET-D75LE8 Throw ratio 1.4-1.6:1 1.9-2.5:1 2.5-3.6:1 3.6-6.9:1 6.8-10.9:1 10.9-20.5:1 Projected image size Projection distance (L) Height Min.
  • Page 45 Chapter 2 Getting Started — Setting up For PT-DZ16K2 r When the image aspect ratio is 16:9 (Unit: m) Lens type Zoom lens Projection lens Model No. ET-D75LE6 ET-D75LE10 ET-D75LE20 ET-D75LE30 ET-D75LE40 ET-D75LE8 Throw ratio 0.9-1.1:1 1.3-1.7:1 1.7-2.4:1 2.4-4.7:1 4.6-7.4:1 7.3-13.8:1 Projected image size Projection distance (L) Height...
  • Page 46 Chapter 2 Getting Started — Setting up r When the image aspect ratio is 4:3 (Unit: m) Lens type Zoom lens Projection lens Model No. ET-D75LE6 ET-D75LE10 ET-D75LE20 ET-D75LE30 ET-D75LE40 ET-D75LE8 Throw ratio 1.2-1.5:1 1.7-2.2:1 2.2-3.2:1 3.2-6.2:1 6.2-9.9:1 9.8-18.5:1 Projected image size Projection distance (L) Height Min.
  • Page 47 When calculating a projection distance using image size designation (value in inches), multiply the value in inches by 0.0254 and substitute it into SD in the formula for calculating the projection distance. For PT-DZ21K2 r Zoom lens Projection distance (L) formula Projection lens Model No.
  • Page 48 Chapter 2 Getting Started — Setting up Projection distance (L) formula Projection lens Model No. Throw ratio Aspect ratio Min. (LW) Max. (LT) 2.6 - 5.1:1 = 2.1089 x SD - 0.1131 = 4.0899 x SD - 0.1765 ET-D75LE30 2.6 - 5.1:1 16:9 = 2.2972 x SD - 0.1131 = 4.4552 x SD - 0.1765...

  • Page 49: Adjusting Adjustable Feet

    Chapter 2 Getting Started — Setting up For PT-DZ16K2 r Zoom lens Projection distance (L) formula Projection lens Model No. Throw ratio Aspect ratio Min. (LW) Max. (LT) 0.9 - 1.1:1 16:9 = 0.8201 x SD - 0.0566 = 0.9825 x SD - 0.0736 ET-D75LE6 1.2 - 1.5:1 = 1.0036 x SD - 0.0566...

  • Page 50: Attaching/Removing The Projection Lens (Optional)

    Chapter 2 Getting Started — Attaching/removing the projection lens (optional) Attaching/removing the projection lens (optional) Move the lens position to the home position before replacing or removing the projection lens. (x page 67) Attention f Replace the projection lens after turning off the power of the projector. f Do not touch the electric contacts of the projection lens.

  • Page 51: Removing The Projection Lens

    Chapter 2 Getting Started — Attaching/removing the projection lens (optional) Removing the projection lens Remove the projection lens using the following procedure. (ii) Lens release button Lens mount cover Fig. 1 Fig. 2 Remove the lens mount cover. (Fig. 1) f Remove the lens mount cover by pulling it towards you while holding the left and right buttons from both the upper and lower side.

  • Page 52: Connecting

    Chapter 2 Getting Started — Connecting Connecting Before connecting f Before connecting, carefully read the operating instructions for the external device to be connected. f Turn off the power of all devices before connecting cables. f Take note of the following points before connecting the cables. Failure to do so may result in malfunctions. g When connecting a cable to a device connected to the projector or the projector itself, touch any nearby metallic objects to eliminate static electricity from your body before performing work.

  • Page 53: Connecting Example: Av Equipment

    ― (24) T.M.D.S clock- Connecting example: AV equipment For <HDMI IN>/<DVI-D IN>/<RGB 1 IN> terminals The connection example is for PT-DZ21K2 and PT-DS20K2. VCR (with built-in TBC) VCR (with built-in TBC) DVD player with HDMI terminal (HDCP) Blu-ray disc player Attention f Always use one of the following when connecting a VCR.

  • Page 54: Connecting Example: Computers

    To input the dual link signals, use same length and same type of cables to connect to the <SDI IN 1>/<SDI IN 2> terminals. The image may not be displayed correctly when the difference in length of the connection cables is 4 m (13'1") or more. (Only for PT-DZ21K2, PT-DS20K2) f To input the dual link signals, directly connect with the external devices that will output the signal without using a distributor, etc.

  • Page 55: Connecting Example Using Digital Link

    150 m (492'2") if the twisted-pair-cable transmitter supports the long-reach communication method. If this distance is exceeded, image may be disrupted or a malfunction may occur in LAN communication. Please note that Panasonic does not support the use of the projector outside the maximum transmission distance.
  • Page 56 (http://panasonic.net/avc/projector/). Note that the verification for devices of other manufacturers has been made for the items set by Panasonic Corporation, and not all the operations have been verified. For operation or performance problems caused by the devices of other manufacturers, contact the respective manufacturers.

  • Page 57: Chapter 3 Basic Operations

    Basic Operations Chapter 3 This chapter describes basic operations to start with. ENGLISH - 57...

  • Page 58: Switching On/Off The Projector

    Chapter 3 Basic Operations — Switching on/off the projector Switching on/off the projector Connecting the power cord Make sure that the supplied power cord is securely fixed to the projector body to prevent it from being removed easily. Confirm that the <MAIN POWER> switch is on the <OFF> side before connecting the power cord. For details of power cord handling, refer to “Read this first!”...

  • Page 59: Switching On The Projector

    Chapter 3 Basic Operations — Switching on/off the projector Note f While the power indicator <ON (G)/STANDBY (R)> lights in orange, the fan is running to cool the projector. f For about 150 seconds after the projector is switched off and the luminous lamp cooling is started, the lamp indicators do not light up even if the power is switched on.

  • Page 60: When The Initial Setting Screen Is Displayed

    Chapter 3 Basic Operations — Switching on/off the projector When the initial setting screen is displayed When the projector is switched on for the first time after purchase, as well as when [ALL USER DATA] is executed from the [PROJECTOR SETUP] menu → [INITIALIZE], the focus adjustment screen is displayed after projection starts, then the [INITIAL SETTING] screen is displayed.
  • Page 61 Chapter 3 Basic Operations — Switching on/off the projector Initial setting (installation setting) Set [PROJECTION METHOD] depending on the installation mode. Refer to “Installation mode” (x page 33) for details. After completed the initial setting, you can change the setting from the [PROJECTOR SETUP] menu → [PROJECTION METHOD].
  • Page 62 Chapter 3 Basic Operations — Switching on/off the projector Initial setting (screen setting) (Only for PT-DZ21K2, PT-DS20K2, PT-DZ16K2) Set the screen format (aspect ratio) and display position of the image. After completed the initial setting, you can change the settings of each item from the [DISPLAY OPTION] menu → [SCREEN SETTING].

  • Page 63: Making Adjustments And Selections

    Press the input selection button (<RGB1>, <RGB2>, <DIGITAL LINK>, <DVI-D>, <HDMI>, <SDI 1/2>, or <SDI>) to select the input signal. (SDI input is supported only for PT-DZ21K2, PT-DS20K2, and PT-DZ16K2.) Adjust the front, back and sideway tilt of the projector with the adjustable feet. (x page 49) Press the <SHIFT>...

  • Page 64: Switching Off The Projector

    Chapter 3 Basic Operations — Switching on/off the projector Press the <ZOOM> button again to adjust the zoom and the image size to match the screen. Note f When the projector is switched on for the first time after purchase, as well as when [ALL USER DATA] is executed from the [PROJECTOR SETUP] menu →...

  • Page 65: Projecting

    Press the input selection button (<RGB1>, <RGB2>, <DIGITAL LINK>, <DVI-D>, <HDMI>, <SDI 1/2>, or <SDI>) on the remote control or the control panel. (SDI input is supported only for PT-DZ21K2, PT-DS20K2, and PT-DZ16K2.) f The image of the signal being input in the selected terminal is projected.

  • Page 66: Adjusting The Lens Position And Focus When The Fixed-Focus Lens (Model No.: Et-D75Le90) Is Used

    Chapter 3 Basic Operations — Projecting f When the main power is switched off during focus adjustment, lens calibration is performed automatically during the next focus adjustment. f When the main power is switched off during shift adjustment, a lens calibration error screen will be displayed during the next shift adjustment.

  • Page 67: Setting The Lens Position

    (standard projection position) or the position of the projected image in the ET-D75LE90 lens standard position (reference projection position). r For PT-DZ21K2 Projection lens Model No. ET-D75LE8, ET-D75LE10, ET-D75LE20,...
  • Page 68 Chapter 3 Basic Operations — Projecting r For PT-DS20K2 Projection lens Model No. ET-D75LE8, ET-D75LE10, ET-D75LE20, ET-D75LE6 ET-D75LE30, ET-D75LE40 Projected image width H Projected image width H 0.2 H 0.3 H 0.2 H 0.3 H Standard projection position Standard projection position r For PT-DW17K2 Projection lens Model No.

  • Page 69: Adjusting The Lens Mounter When The Focus Is Unbalanced

    Chapter 3 Basic Operations — Projecting f When the optional fixed-focus lens (Model No.: ET-D75LE90) is attached to the PT-DS20K2, use it in the reference projection position without adjusting shift. Adjusting the lens mounter when the focus is unbalanced Focus balance Relationship between the tilt of the lens and the screen focus surface When the projection lens is tilted in contrast with the image forming surface, tilting the front side (screen side) of the projection lens downwards (in the direction of the dotted arrow line), the upper side of the screen focus...
  • Page 70 Chapter 3 Basic Operations — Projecting Adjustment procedure r Relationship between the adjustment location and adjustment screws (b)+(c) Adjustment location: Location where the just focus point of the screen is in the inner side of the screen When the just focus point of When the just focus point of the When the just focus point of When the just focus point of the...

  • Page 71: Operating With The Remote Control

    Chapter 3 Basic Operations — Operating with the remote control Operating with the remote control Switching the input The input for projection can be switched. Method to switch the input is as follows. f Press the input selection button and directly specify the input to project. f Display the input selection screen and select the input to project from the list.

  • Page 72: Using The Shutter Function

    [CONTROL DEVICE SETUP]. (PT-DZ16K2) Switches the input to SDI. *1 SDI input is supported only for PT-DZ21K2, PT-DS20K2, and PT-DZ16K2. Note f When the optional DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET-YFB200G) is connected to the <DIGITAL LINK/ LAN>...

  • Page 73: Using The On-Screen Display Function

    Chapter 3 Basic Operations — Operating with the remote control Press the <SHUTTER> button again. f The image is displayed. Note f The power indicator <ON (G)/STANDBY (R)> will blink slowly in green while the shutter function is in use (shutter: closed). f You can set the speed of shutter opening/closing via the [DISPLAY OPTION] menu →...

  • Page 74: Using The Function Button

    Press the <FUNCTION> button. Note f [LEFT/RIGHT SWAP] can be assigned only for PT-DZ21K2, PT-DS20K2. f Assignment of the function is performed from the [PROJECTOR SETUP] menu → [FUNCTION BUTTON] (x page 139). Displaying internal test pattern The projector has eight types of internal test patterns to check the condition of the projector body. To display test patterns, perform the following steps.

  • Page 75: Using The Ac Voltage Monitor Function

    Chapter 3 Basic Operations — Operating with the remote control Using the AC voltage monitor function The value of input supply voltage can be displayed on the self-diagnosis display at the side of the projector. r To display during projection Press the power on <b> button. f The value of the input supply voltage is displayed only as numeric value on the self-diagnosis display.

  • Page 76: Chapter 4 Settings

    Settings Chapter 4 This chapter describes the settings and adjustments you can make using the on-screen menu. 76 - ENGLISH...

  • Page 77: Menu Navigation

    Chapter 4 Settings — Menu navigation Menu navigation The on-screen menu (Menu) is used to perform various settings and adjustments of the projector. Navigating through the menu Operating procedure button Press the <MENU> button on the remote control or control panel. f The [MAIN MENU] screen is displayed.

  • Page 78: Main Menu

    To display the on-screen menu in portrait, go to the [DISPLAY OPTION] menu → [ON-SCREEN DISPLAY] (x page 119) and change the [OSD ROTATION] setting. (Only for PT-DZ21K2, PT-DS20K2, PT-DW17K2) Resetting adjustment values to the factory default If the <DEFAULT> button on the remote control is pressed, the values adjusted in the menu items are restored to the factory default settings.

  • Page 79: Sub-Menu

    [P IN P] [TEST PATTERN] [SIGNAL LIST] [SECURITY] [NETWORK] *1 Only for PT-DZ21K2, PT-DS20K2 Sub-menu The sub-menu of the selected main menu item is displayed, and you can set and adjust items in the sub-menu. [PICTURE] Sub-menu item Factory default...

  • Page 80: Display Language

    [FRAME LOCK] ― [RASTER POSITION] ― *1 Depends on the signal input. *2 Only for PT-DZ21K2, PT-DS20K2 Note f Sub-menu items and factory default settings vary depending on the selected input terminal. [DISPLAY LANGUAGE] Details (x page 102) [3D SETTINGS]...

  • Page 81: Projector Setup

    Chapter 4 Settings — Menu navigation Sub-menu item Factory default Page [WAVEFORM MONITOR] [OFF] [CUT OFF] ― *1 Only for PT-DZ21K2, PT-DS20K2, PT-DZ16K2 [PROJECTOR SETUP] Sub-menu item Factory default Page [PROJECTOR ID] [ALL] [PROJECTION METHOD] [FRONT/FLOOR] [LAMP SELECT] [QUAD] [LAMP RELAY]...
  • Page 82 Chapter 4 Settings — Menu navigation [NETWORK] Sub-menu item Factory default Page [DIGITAL LINK MODE] [AUTO] [DIGITAL LINK SETUP] ― [DIGITAL LINK STATUS] ― [NETWORK SETUP] ― [NETWORK CONTROL] ― [NETWORK STATUS] ― [DIGITAL LINK MENU] ― [Art-Net SETUP] [OFF] [Art-Net CHANNEL SETTING] [Art-Net STATUS] ―...

  • Page 83: [Picture] Menu

    Chapter 4 Settings — [PICTURE] menu [PICTURE] menu On the menu screen, select [PICTURE] from the main menu, and select an item from the sub-menu. Refer to “Navigating through the menu” (x page 77) for the operation of the menu screen. [PICTURE MODE] You can switch to the desired picture mode suitable for the image source and the environment in which the projector is used.

  • Page 84: [Brightness]

    Chapter 4 Settings — [PICTURE] menu Attention f Adjust [BRIGHTNESS] first when you need to adjust the black level. [BRIGHTNESS] You can adjust the dark (black) part of the projected image. Press as to select [BRIGHTNESS]. Press qw or the <ENTER> button. f The [BRIGHTNESS] individual adjustment screen is displayed.
  • Page 85 Chapter 4 Settings — [PICTURE] menu [USER1] Adjusts white balance as desired. Refer to “Adjusting desired white balance” (x page 85) for details. [USER2] [3200K] - [9300K] Allows you to set in increments of 100 K. Select so that images become natural. Note f When [PICTURE MODE] (x page 83) is set to [USER] or [DICOM SIM.], [DEFAULT] cannot be selected.

  • Page 86: [Gamma]

    Chapter 4 Settings — [PICTURE] menu Press the <ENTER> button. f The confirmation screen is displayed. Press qw to select [OK], and press the <ENTER> button. f The [USER1] or [USER2] data is overwritten. f If you press qw to select [CANCEL] and then press the <ENTER> button, the data will not be overwritten. f The [WHITE BALANCE HIGH] screen is displayed.

  • Page 87: [System Daylight View]

    Chapter 4 Settings — [PICTURE] menu Note f DICOM is an abbreviation of “Digital Imaging and COmmunication in Medicine” and is a standard for medical imaging devices. Although the DICOM name is used, the projector is not a medical device, and should not be used for purposes such as diagnosis of display images. Changing the name of [USER1] or [USER2] Press as to select [GAMMA].

  • Page 88: [Noise Reduction]

    Chapter 4 Settings — [PICTURE] menu [NOISE REDUCTION] You can reduce noises when the input image is degraded and noise is occurring in the image signal. Press as to select [NOISE REDUCTION]. Press qw or the <ENTER> button. f The [NOISE REDUCTION] individual adjustment screen is displayed. Press qw to switch the item.

  • Page 89: [System Selector]

    Select system method with asqw when the signal is input by connecting to the <SDI IN> terminal or the <SDI IN 1>/<SDI IN 2> terminal. (Only for PT-DZ21K2, PT-DS20K2, PT-DZ16K2) f Available system formats vary depending on the input signal.

  • Page 90: Srgb-Compliant Video

    Chapter 4 Settings — [PICTURE] menu sRGB-compliant video sRGB is an international standard (IEC61966-2-1) for color reproduction defined by IEC (International Electrotechnical Commission). Set according to the following steps to reproduce more faithful, sRGB compliant colors. Set [COLOR MATCHING] to [OFF]. f Refer to [COLOR MATCHING] (x page 108).

  • Page 91: [Position] Menu

    For the portrait setting, image position is moved horizontally when “Vertical (up and down) adjustment” is made. Image position is moved vertically when “Horizontal (right and left) adjustment” is made. (Only for PT-DZ21K2, PT-DS20K2, PT-DW17K2) [ASPECT] You can switch the aspect ratio of the image.

  • Page 92: [Zoom]

    Chapter 4 Settings — [POSITION] menu The projector identifies the video ID (VID) embedded in the video signals and displays the image by [VID AUTO] automatically switching the screen sizes between 4:3 and 16:9. This function is effective for NTSC signals. The projector identifies the video ID (VID) embedded in the video signals and displays the image by [AUTO] automatically switching the screen sizes between 4:3 and 16:9.

  • Page 93: [Clock Phase]

    Chapter 4 Settings — [POSITION] menu When [ASPECT] is set to [DEFAULT] Press as to select [ZOOM]. Press the <ENTER> button. f The [ZOOM] screen is displayed. Press as to select [MODE]. Press qw to switch the item. [INTERNAL] Enlarges the size within the aspect range set with [SCREEN FORMAT]. [FULL] Enlarges or reduces the size using the entire display area set with [SCREEN FORMAT].
  • Page 94 [PC-2] Performs geometric adjustment using a computer. [PC-3] *1 Only for PT-DZ21K2, PT-DS20K2 Advanced skills are necessary to use a computer to control geometric adjustment. Consult your dealer. Up to three geometric adjustments performed using the computer can be saved.
  • Page 95 The optional Upgrade Kit (Model No.: ET-UK20) can be used to expand the correctable range. To purchase the product, consult your dealer. (Only for PT-DZ21K2, PT-DS20K2) f The image may disappear for a moment while performing adjustment, but it is not a malfunction.

  • Page 96: [Advanced Menu] Menu

    Up to three blanking settings adjusted using the computer can be saved. (Only for PT-DZ21K2, PT-DS20K2) To use the [CUSTOM MASKING] function, the optional Upgrade Kit (Model No.: ET-UK20) is required. To purchase the product, consult your dealer.

  • Page 97: [Input Resolution]

    Adjustment Range of adjustment The blanking zone Press w. moves to the right. Left side of the [LEFT] PT-DZ21K2: Left to right screen The blanking zone 0 - 959 Press q. moves to the left. PT-DS20K2: Left to right 0 - 699...

  • Page 98: [Edge Blending]

    Chapter 4 Settings — [ADVANCED MENU] menu [EDGE BLENDING] The edge blending function allows multiple projector images to be seamlessly overlapped by using the inclination of the brightness at the overlapped area. Press as to select [EDGE BLENDING]. Press qw to switch the item. f The items will switch each time you press the button.

  • Page 99: [Frame Response]

    15) Press as to select [UPPER], [LOWER], [LEFT], or [RIGHT] in [BLACK BORDER WIDTH]. 16) Press qw to set the region (width) of the [BLACK BORDER WIDTH] adjustment. f When PT-DZ21K2, PT-DS20K2, or PT-DZ16K2 is used, proceed to Step 17). f When PT-DW17K2 is used, proceed to Step 19).

  • Page 100: [Frame Creation]

    (x page 104) is set to [AUTO], [SIMULTANEOUS], [SIDE BY SIDE], [TOP AND BOTTOM], [LINE BY LINE], or [FRAME SEQUENTIAL]. In [AUTO], the setting will be disabled only when 3D format can be recognized. (Only for PT-DZ21K2, PT-DS20K2) f The [FRAME CREATION] setting will be disabled and cannot be selected when the [DISPLAY OPTION] menu → [SIMUL INPUT SETTING] (x page 112) is set to [AUTO(3D)] or [AUTO(2D)] and the image in simultaneous format is displayed.

  • Page 101: [Raster Position]

    Chapter 4 Settings — [ADVANCED MENU] menu Press qw to switch the item. f The items will switch each time you press the button. [OFF] Decreases the flickering of the displayed image. [ON] Synchronizes the displayed image to the vertical scanning frequency of the input signal. Note f [FRAME LOCK] is not displayed when a signal with the vertical scanning frequency other than the above is input or 2D images are displayed.

  • Page 102: [Display Language] Menu

    Chapter 4 Settings — [DISPLAY LANGUAGE] menu [DISPLAY LANGUAGE] menu On the menu screen, select [DISPLAY LANGUAGE] from the main menu, and display the sub-menu. Refer to “Navigating through the menu” (x page 77) for the operation of the menu screen. Changing the display language You can select the language of the on-screen display.

  • Page 103: [3D Settings] Menu

    Chapter 4 Settings — [3D SETTINGS] menu [3D SETTINGS] menu (Only for PT-DZ21K2, PT-DS20K2) On the menu screen, select [3D SETTINGS] from the main menu, and select an item from the sub-menu. Refer to “Navigating through the menu” (x page 77) for the operation of the menu screen.

  • Page 104: [3D Input Format]

    3D trigger output is selected. Note f [11] in [3D SYNC MODE] is the setting when the 3D IR transmitter TY-3DTRW of Panasonic (production discontinued) is used with the projector. Consult your dealer regarding the connection method. [3D INPUT FORMAT] Set the 3D format for the image signals being input.

  • Page 105: [3D Picture Balance]

    Chapter 4 Settings — [3D SETTINGS] menu Press qw to switch the item. f The items will switch each time you press the button. [SHARED 2D/3D] Uses same correction data for 2D signal and 3D signal. [SEPARATE 2D/3D] Uses different correction data for 2D signal and 3D signal. Note f Switch the setting of [COLOR MATCHING] (x page 108) while the signal to be adjusted is being input.

  • Page 106: [3D Frame Delay]

    Chapter 4 Settings — [3D SETTINGS] menu [0.5ms] [1.0ms] [1.5ms] Sets an item so that 3D setting is made correctly. [2.0ms] [2.5ms] [2.7ms] Note f This function is disabled when [3D SYSTEM SETTING] is set to anything other than [SINGLE]. f The crosstalk may get larger or the displayed image may get darker when the setting does not match with the 3D system in use. [3D FRAME DELAY] Adjust the timing of the left-right switch of an image.

  • Page 107: [Safety Precautions Message]

    Chapter 4 Settings — [3D SETTINGS] menu [SAFETY PRECAUTIONS MESSAGE] Set to show or hide the safety precautions message related to 3D viewing when the projector is switched on. Press as to select [SAFETY PRECAUTIONS MESSAGE]. Press qw to switch the item. f The items will switch each time you press the button.

  • Page 108: [Display Option] Menu

    By setting [3D COLOR MATCHING] (x page 104), you can set whether to configure different settings for 2D signal and 3D signal, or to use common data. (Only for PT-DZ21K2, PT-DS20K2) f [NATIVE] or [3D] is displayed at the top right of the menu when different settings are used for 2D signal and 3D signal. (Only for PT-DZ21K2, PT-DS20K2)

  • Page 109: [Large Screen Correction]

    Performs weak correction. Performs strong correction. [SCREEN SETTING] (Only for PT-DZ21K2, PT-DS20K2, PT-DZ16K2) Set the screen size. Correct to the optimum image position for the set screen when the aspect ratio of a projected image is changed. Set as necessary for the screen in use.

  • Page 110: [Auto Signal]

    Adjusts the horizontal position between -240 and 240. Press as to select [SCREEN POSITION]. f [SCREEN POSITION] cannot be selected or adjusted when [SCREEN FORMAT] is set to the following item. PT-DZ21K2: [16:10] PT-DS20K2: [4:3] PT-DZ16K2: [16:9] Press qw to adjust [SCREEN POSITION].

  • Page 111: [Backup Input Setting]

    Primary input is fixed to the <SDI IN 1> terminal, and the secondary input is fixed to the <SDI IN 2> terminal. *1 Only for PT-DW17K2, PT-DZ16K2 *2 Only for PT-DZ21K2, PT-DS20K2 Press as to select [AUTOMATIC SWITCHING]. f When [BACKUP INPUT MODE] is set to [OFF], [AUTOMATIC SWITCHING] cannot be selected.

  • Page 112: [Simul Input Setting]

    If [AUTO(2D)] is set, 2D images are displayed when the same 2D compatible signals are entered to each input. f When [AUTO(3D)] is set, 3D images are displayed when the same 3D compatible signals are entered to each input. (Only for PT-DZ21K2, PT-DS20K2) f [SIMUL INPUT SETTING] cannot be set during P IN P.

  • Page 113: [Rgb In]

    Chapter 4 Settings — [DISPLAY OPTION] menu f This may not function properly depending on the signal. f Usage of each input signal is displayed in [RGB1] and [RGB2], in [HDMI] and [DVI-D], and in [SDI1] and [SDI2] of the [SIMUL INPUT SETTING] screen when [AUTO(3D)] or [AUTO(2D)] is set.

  • Page 114: [Dvi-D In]

    Changes EDID data according to the [SCREEN FORMAT] setting. [USER] Sets the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items to EDID. *1 Only for PT-DZ21K2, PT-DS20K2, PT-DZ16K2 f When [DEFAULT] or [SCREEN FIT] is selected, proceed to Step 10). Press the <ENTER> button.

  • Page 115: [Hdmi In]

    Changes EDID data according to the [SCREEN FORMAT] setting. [USER] Sets the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items to EDID. *1 Only for PT-DZ21K2, PT-DS20K2, PT-DZ16K2 f When [DEFAULT] or [SCREEN FIT] is selected, proceed to Step 10). Press the <ENTER> button.
  • Page 116 Changes EDID data according to the [SCREEN FORMAT] setting. [USER] Sets the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items to EDID. *1 Only for PT-DZ21K2, PT-DS20K2, PT-DZ16K2 f When [DEFAULT] or [SCREEN FIT] is selected, proceed to Step 10). Press the <ENTER> button.

  • Page 117: [Digital Link In]

    Changes EDID data according to the [SCREEN FORMAT] setting. [USER] Sets the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items to EDID. *1 Only for PT-DZ21K2, PT-DS20K2, PT-DZ16K2 f When [DEFAULT] or [SCREEN FIT] is selected, proceed to Step 10). Press the <ENTER> button.

  • Page 118: [Sdi In]

    [SDI IN] (Only for PT-DZ21K2, PT-DS20K2, PT-DZ16K2) Set this function in accordance with the signal input to the <SDI IN 1>/<SDI IN 2> terminal (PT-DZ21K2, PT-DS20K2) or the <SDI IN> terminal (PT-DZ16K2). Setting [SDI LINK] (Only for PT-DZ21K2, PT-DS20K2) Press as to select [SDI IN].

  • Page 119: [On-Screen Display]

    Sets to the bottom right of the screen. Sets to the upper left of the screen. Setting [OSD ROTATION] (Only for PT-DZ21K2, PT-DS20K2, PT-DW17K2) Set the orientation of the menu screen (OSD). Press as to select [ON-SCREEN DISPLAY]. Press the <ENTER> button.
  • Page 120 Chapter 4 Settings — [DISPLAY OPTION] menu [OFF] Does not rotate the screen. [CLOCKWISE] Rotates the screen by 90° clockwise. [COUNTERCLOCKWISE] Rotates the screen by 90° counterclockwise. Setting [OSD DESIGN] Set the color of the menu screen (OSD). Press as to select [ON-SCREEN DISPLAY]. Press the <ENTER>...

  • Page 121: [Image Rotation]

    Displays the warning message. [OFF] Hides the warning message. [IMAGE ROTATION] (Only for PT-DZ21K2, PT-DS20K2, PT-DW17K2) Set whether to rotate the input image when projecting. Press as to select [IMAGE ROTATION]. Press qw to select an item. f The items will switch each time you press the button.

  • Page 122: [Uniformity]

    Setting [PC CORRECTION] (Only for PT-DZ21K2, PT-DS20K2) To use the [PC CORRECTION] function, the optional Upgrade Kit (Model No.: ET-UK20) is required. To purchase the product, consult your dealer. Press as to select [UNIFORMITY].

  • Page 123: [Freeze]

    Chapter 4 Settings — [DISPLAY OPTION] menu Press the <ENTER> button. f The [SHUTTER SETTING] screen is displayed. Press as to select [FADE-IN] or [FADE-OUT]. Press qw to switch the item. Item Adjustment [OFF] Does not set fade-in or fade-out. [FADE-IN] Sets the fade-in or fade-out time.
  • Page 124 The waveform monitor turns off when [P IN P] is executed during waveform monitoring. f The waveform monitor is not displayed when on-screen display is hidden (off). f Use [3D WAVEFORM MONITOR] to display waveform monitor with 3D image. (Only for PT-DZ21K2, PT-DS20K2) Adjusting the waveform Project the luminance adjustment signal of a commercial test disk (0 % (0 IRE or 7.5 IRE) –...

  • Page 125: [Cut Off]

    Note f For DVI-D signal, HDMI signal, SDI signal, and DIGITAL LINK signal, confirm that the [SIGNAL LEVEL] setting is correct before black level adjustment. (SDI signal is supported only for PT-DZ21K2, PT-DS20K2, PT-DZ16K2) [CUT OFF] Each red, green, and blue color component can be removed.

  • Page 126: [Projector Setup] Menu

    Chapter 4 Settings — [PROJECTOR SETUP] menu [PROJECTOR SETUP] menu On the menu screen, select [PROJECTOR SETUP] from the main menu, and select an item from the sub- menu. Refer to “Navigating through the menu” (x page 77) for the operation of the menu screen. [PROJECTOR ID] The projector has an ID number setting function that can be used when multiple projectors are used side by side to enable simultaneous control or individual control via a single remote control.

  • Page 127: [Lamp Relay]

    *1 1 000 hours when using the optional Replacement lamp unit (for portrait mode) (Model No.: ET-LAD520P (1 pc), ET-LAD520PF (4 pcs)). (Only for PT-DZ21K2, PT-DS20K2, PT-DW17K2) f Ensure that lamp units not to be turned on are also installed.

  • Page 128: [Brightness Control]

    Chapter 4 Settings — [PROJECTOR SETUP] menu Note f The [LAMP RELAY] function is enabled when [SINGLE], [DUAL], [TRIPLE], or [QUAD] is selected in [LAMP SELECT]. f When [SINGLE] or [DUAL] is selected in [LAMP SELECT], lamps are switched at the specified time. When [TRIPLE] is selected in [LAMP SELECT], lamps are switched three times every two hours after the specified time, and then the previous status is maintained until the next specified time.
  • Page 129 Chapter 4 Settings — [PROJECTOR SETUP] menu Corrects the brightness of the screen by the brightness sensor. [AUTO] Automatically corrects screen brightness when lamp brightness changes. Synchronizes nine or more projectors using a computer and dedicated software “Multi Monitoring & [PC] Control Software”...
  • Page 130 Chapter 4 Settings — [PROJECTOR SETUP] menu f If the <ENTER> button is pressed when [LINK] is set from [GROUP A] to [GROUP D], the group name is displayed on the screens of projectors that have been set in the same group. LINK GROUP A Note...
  • Page 131 Chapter 4 Settings — [PROJECTOR SETUP] menu When [MODE] of [BRIGHTNESS CONTROL SETUP] is set to [AUTO] and [LINK] is set to [OFF] The screen shows the status of the brightness control in one projector. BRIGHTNESS CONTROL STATUS LINK PROJECTOR RETURN MENU When [MODE] of [BRIGHTNESS CONTROL SETUP] is set to [AUTO] and [LINK] is set from [GROUP A] to [GROUP D]...
  • Page 132 Chapter 4 Settings — [PROJECTOR SETUP] menu r Error details Error message Measures to take f Limit the number of projectors in one group to eight. [Exceed maximum number of f To synchronize nine or more projectors, use a PC and the dedicated software “Multi Monitoring & projectors.] Control Software”...

  • Page 133: [Standby Mode]

    Chapter 4 Settings — [PROJECTOR SETUP] menu [STANDBY MODE] Set the power consumption during the standby. Press as to select [STANDBY MODE]. Press qw to switch the item. f The items will switch each time you press the button. [NORMAL] Select this item to use the network function during standby. [ECO] Select this item to reduce power consumption during standby.
  • Page 134 Switches the input to SDI2. Switches the input to DIGITAL LINK, and switches the input of the [INPUT1] - [INPUT10] Panasonic twisted-pair-cable transmitter to the specified input. Turns on one lamp. (The lamp with shorter runtime will [SINGLE] automatically light.) Turns on two lamps.

  • Page 135: [Initial Startup]

    [SDI] Sets the input to SDI. [SDI2] Sets the input to SDI2. Sets the input to DIGITAL LINK, and switches the input of the Panasonic twisted-pair-cable [INPUT1] - [INPUT10] transmitter to the specified input. *1 Only for PT-DZ21K2, PT-DS20K2 *2 Only for PT-DZ16K2 *3 When the optional DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET-YFB200G) is connected to the projector, its input...
  • Page 136 Chapter 4 Settings — [PROJECTOR SETUP] menu Press as to select [INPUT SELECT]. Press qw to switch the item. [PROJECTOR] Performs the RS-232C communication with the <SERIAL IN> terminal of the projector. Performs the RS-232C communication via the optional DIGITAL LINK output supported device (Model [DIGITAL LINK] No.: ET-YFB100G, ET-YFB200G) and the <DIGITAL LINK/LAN>...

  • Page 137: [Status]

    Chapter 4 Settings — [PROJECTOR SETUP] menu Press as to select [GROUP]. Press qw to switch the item. Controls multiple projectors simultaneously by sending the ID of RS-232C. You can set groups from [A] - [Z] [A] to [Z]. The projector responds when the ID of RS-232C matches the setting. Press as to select [RESPONSE(ID GROUP)].

  • Page 138: [Ac Voltage Monitor]

    The “runtime” displayed in the [STATUS] may be different from the actual times when a lamp unit that was attached to a different projector model is installed on this projector (PT-DZ21K2, PT-DS20K2, PT-DW17K2, PT-DZ16K2), or when the lamp unit that was attached to this projector is installed on a different projector model.

  • Page 139: [Remote2 Mode]

    Switches the [LEFT/RIGHT SWAP] setting. (x page 104) [PROJECTION METHOD] Switches the [PROJECTION METHOD] setting. (x page 126) *1 Only for PT-DZ21K2, PT-DS20K2 Press the <ENTER> button. [DATE AND TIME] Set the time zone, date, and time of the built-in clock of the projector.

  • Page 140: [Lens Calibration]

    Chapter 4 Settings — [PROJECTOR SETUP] menu Setting the date and time manually Press as to select [DATE AND TIME]. Press the <ENTER> button. f The [DATE AND TIME] screen is displayed. Press as to select [ADJUST CLOCK]. Press the <ENTER> button. f The [ADJUST CLOCK] screen is displayed.

  • Page 141: [Lens Memory]

    Chapter 4 Settings — [PROJECTOR SETUP] menu Note f [PROGRESS] is displayed in the menu during lens calibration. The operation cannot be canceled during calibration. f When lens calibration executes correctly, [COMPLETE] is displayed and [INCOMPLETE] is displayed when it does not execute correctly. f Pressing the <FOCUS>...

  • Page 142: [Save All User Data]

    Chapter 4 Settings — [PROJECTOR SETUP] menu Press the <ENTER> button. Press as to select [LENS MEMORY EDIT]. Press the <ENTER> button. f The [LENS MEMORY EDIT] screen is displayed. Press as to select [LENS MEMORY DELETE]. Press the <ENTER> button. f The [LENS MEMORY DELETE] screen is displayed.

  • Page 143: [Load All User Data]

    Chapter 4 Settings — [PROJECTOR SETUP] menu [LOAD ALL USER DATA] Load the various setting values saved as a backup in the built-in memory of the projector. Press as to select [LOAD ALL USER DATA]. Press the <ENTER> button. f The [SECURITY PASSWORD] screen is displayed. Enter a security password and press the <ENTER>...

  • Page 144: [P In P] Menu

    Chapter 4 Settings — [P IN P] menu [P IN P] menu On the menu screen, select [P IN P] from the main menu, and select an item from the sub-menu. Refer to “Navigating through the menu” (x page 77) for the operation of the menu screen. Using P IN P function Locate a separate, small sub screen in the main screen to project two images simultaneously.
  • Page 145 [P IN P] cannot be set when [IMAGE ROTATION] is set to other than [OFF]. f 3D images cannot be displayed while in P IN P. (Only for PT-DZ21K2, PT-DS20K2) f [P IN P] cannot be set when [SIMUL INPUT SETTING] is set to other than [OFF].

  • Page 146: [Test Pattern] Menu

    Chapter 4 Settings — [TEST PATTERN] menu [TEST PATTERN] menu On the menu screen, select [TEST PATTERN] from the main menu. Refer to “Navigating through the menu” (x page 77) for the operation of the menu screen. [TEST PATTERN] Display the test pattern built-in to the projector. Settings of position, size, and other factors will not be reflected in test patterns.

  • Page 147: [Signal List] Menu

    Chapter 4 Settings — [SIGNAL LIST] menu [SIGNAL LIST] menu On the menu screen, select [SIGNAL LIST] from the main menu. Refer to “Navigating through the menu” (x page 77) for the operation of the menu screen. r Registered signal details Memory number: A1 (1-2) Sub memory number...

  • Page 148: Protecting The Registered Signal

    Chapter 4 Settings — [SIGNAL LIST] menu Press the <ENTER> button. f The selected signal will be deleted. Note f A registered signal can also be deleted from [REGISTERED SIGNAL DELETE] on the [REGISTERED SIGNAL SETUP] screen. Protecting the registered signal Press asqw to select the signal to protect.

  • Page 149: Sub Memory

    Chapter 4 Settings — [SIGNAL LIST] menu f When a signal to be input corresponds to multiple signals set in [WIDE], a registered signal with a high memory number receives priority. Example: a signal to be input that corresponds to memory numbers A2, A4 and B1 will be determined to be B1. f When a registration signal is deleted, the settings are also deleted.

  • Page 150: [Security] Menu

    Chapter 4 Settings — [SECURITY] menu [SECURITY] menu On the menu screen, select [SECURITY] from the main menu, and select an item from the sub-menu. Refer to “Navigating through the menu” (x page 77) for the operation of the menu screen. f When the projector is used for the first time Initial password: Press awsqawsq in order, and press the <ENTER>...

  • Page 151: [Text Change]

    Chapter 4 Settings — [SECURITY] menu Press qw to switch the item. f The items will switch each time you press the button. [OFF] Hides the security message. [TEXT] Displays the text set in the [SECURITY] menu → [TEXT CHANGE]. [USER LOGO] Displays the image registered by the user.

  • Page 152: [Control Device Password Change]

    [ON SCREEN BUTTON] ― <ON SCREEN> button [OTHER BUTTON] Buttons not listed above asqw, <ENTER> button *1 SDI input is supported only for PT-DZ21K2, PT-DS20K2, PT-DZ16K2. Press qw to switch the item. [ENABLE] Enables button operations. [DISABLE] Disables button operations.
  • Page 153 Chapter 4 Settings — [SECURITY] menu Press asqw to select the text, and press the <ENTER> button to enter the text. Press asqw to select [OK], and press the <ENTER> button. f To cancel, select [CANCEL]. Attention f The initial password is “AAAA” by the factory default or when [ALL USER DATA] in [INITIALIZE] (x page 143) is executed. f Change the password periodically that is hard to guess.

  • Page 154: [Network] Menu

    Chapter 4 Settings — [NETWORK] menu [NETWORK] menu On the menu screen, select [NETWORK] from the main menu, and select an item from the sub-menu. Refer to “Navigating through the menu” (x page 77) for the operation of the menu screen. [DIGITAL LINK MODE] Switch the communication method of the <DIGITAL LINK/LAN>...

  • Page 155: [Digital Link Status]

    Chapter 4 Settings — [NETWORK] menu Press the <ENTER> button. After the confirmation screen is displayed, press qw to select [OK], and then press the <ENTER> button. Note f The projector does not support 10BaseT Full/Half. When the projector is connected to a twisted-pair-cable transmitter Press as to select [DIGITAL LINK SETUP].

  • Page 156: [Network Control]

    Chapter 4 Settings — [NETWORK] menu If a DHCP server exists in the network where the projector is to be [ON] connected, obtains the IP address automatically. [DHCP] If a DHCP server does not exist in the network where the projector [OFF] is to be connected, set [IP ADDRESS], [SUBNET MASK], and [DEFAULT GATEWAY].

  • Page 157: [Digital Link Menu]

    Chapter 4 Settings — [NETWORK] menu [DIGITAL LINK MENU] When the optional DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET-YFB200G) is connected to the <DIGITAL LINK/LAN> terminal, the main menu of DIGITAL LINK output supported device is displayed. Refer to the Operating Instructions of the DIGITAL LINK output supported device for details. Note f [DIGITAL LINK MENU] cannot be selected when [EXTRON XTP] is set to [ON].

  • Page 158: [Art-Net Status]

    [NONE] No definition *1 Only for PT-DZ21K2, PT-DS20K2 f The setting can be also made by pressing as to select the channel, pressing the <ENTER> button to display the item list, pressing asqw to select the item, and pressing the <ENTER> button.

  • Page 159: Connecting To A Twisted-Pair-Cable Transmitter

    Chapter 4 Settings — [NETWORK] menu r Example of a normal network connection Computer Projector LAN cable (straight) LAN cable (straight) f A web browser is required to use this function. Confirm that the web browser can be used beforehand. Supported browser: Internet Explorer 8.0/9.0/10.0/11.0 (Windows OS), Safari 6.0/7.0/8.0 (Mac OS) f Communication with an E-mail server is required to use the E-mail function.

  • Page 160: Accessing From The Web Browser

    (http://panasonic.net/avc/projector/). Note that the verification for devices of other manufacturers has been made for the items set by Panasonic Corporation, and not all the operations have been verified. For operation or performance problems caused by the devices of other manufacturers, contact the respective manufacturers.
  • Page 161 Chapter 4 Settings — [NETWORK] menu Click OK. f The [Projector status] page is displayed. Note f If you use a web browser to control the projector, set [WEB CONTROL] to [ON] in [NETWORK CONTROL] (x page 156). f Do not perform setting or control simultaneously by starting up multiple web browsers. Do not set or control the projector from multiple computers.
  • Page 162 Chapter 4 Settings — [NETWORK] menu [Projector status] page Click [Status] → [Projector status]. Display the status of the projector for the following items. [PROJECTOR TYPE] [AC VOLTAGE] Displays the type of the projector. Displays the input supply voltage. [MAIN VERSION] 10 [INPUT] Displays the firmware version of the projector.

  • Page 163: Error Information Page

    Chapter 4 Settings — [NETWORK] menu Error information page When [Error (Detail)] or [Warning (Detail)] is displayed in the [SELF TEST] display field of the [Projector status] screen, click it to display the content of the error/warning. f The projector may go into the standby status to protect the projector depending on the contents of the error. Self-diagnosis result display Displays the item check results.
  • Page 164 Chapter 4 Settings — [NETWORK] menu Item Description There is a problem with the luminance sensor. If problems persist even after switching [BRIGHTNESS SENSOR] on the power, consult your dealer. [ANGLE SENSOR] There is a problem with the angle sensor. Consult your dealer. [LAMP DRIVE MODE] There is a problem with the lamp.
  • Page 165 Chapter 4 Settings — [NETWORK] menu [Access error log] page Click [Status] → [Access error log]. The error log on the web server is displayed such as access to the pages that do not exist or access with unauthorized user names or passwords. [Mail error log] page Click [Status] →...
  • Page 166 The projector is controlled by clicking the buttons in the same Switches the flip horizontal settings. way as the buttons on the remote control. After control, the on- (Only for PT-DZ21K2, PT-DS20K2) screen display of the projector at the right of the control page is [WAVEFORM MONITOR] updated.
  • Page 167 Chapter 4 Settings — [NETWORK] menu [Network config] page Click [Detailed set up] → [Network config]. f Click [Network config] to display the [CAUTION!] screen. f The current settings are displayed by pressing the [Next] button. f Click [Change] to display the setting change screen. [PROJECTOR NAME] [DNS1] Enter the name of the projector.

  • Page 168: Adjust Clock] Page

    Chapter 4 Settings — [NETWORK] menu [Adjust clock] page Click [Detailed set up] → [Adjust clock]. [Time Zone] [Date] Enter the date to be changed. Select the time zone. [Set time zone] [Time] Updates the time zone setting. Enter the time to be changed. [NTP SYNCHRONIZATION] [Submit] Set to [ON] to adjust the date and time automatically.
  • Page 169 Chapter 4 Settings — [NETWORK] menu [E-mail set up] page When there is a problem or the runtime of a lamp reaches a set value, an E-mail can be sent to preset E-mail addresses (up to two addresses). Click [Detailed set up] → [E-mail set up]. [ENABLE] [MINIMUM TIME] Select [Enable] to use the E-mail function.
  • Page 170 Chapter 4 Settings — [NETWORK] menu [E-MAIL ADDRESS 1], [E-MAIL ADDRESS 2] Settings of the conditions to send E-mail Enter the E-mail address to be sent. Leave [E-MAIL ADDRESS Select the conditions to send E-mail. 2] blank when two E-mail addresses are not to be used. [MAIL CONTENTS]: Select either [NORMAL] or [SIMPLE].
  • Page 171 Chapter 4 Settings — [NETWORK] menu [Authentication set up] page Set the authentication items when POP authentication or SMTP authentication is necessary to send an E-mail. Click [Detailed set up] → [Authentication set up]. [Auth] [Password] Select the authentication method specified by your Internet Enter the password for the POP server or the SMTP server.
  • Page 172 Chapter 4 Settings — [NETWORK] menu Contents of E-mail sent Example of the E-mail sent when E-mail is set The following E-mail is sent when the E-mail settings have been established. === Panasonic projector report(CONFIGURE) === Projector Type : DZ21K2 Serial No...
  • Page 173 Chapter 4 Settings — [NETWORK] menu Example of the E-mail sent for an error The following E-mail is sent when an error has occurred. === Panasonic projector report(ERROR) === Projector Type : DZ21K2 Serial No : 123456789012 ----- check system -----...
  • Page 174 Chapter 4 Settings — [NETWORK] menu [Change password] page Click [Change password]. [Administrator] [Next] Used to change the setting of the [Administrator]. Used to change the setting of the password. [User] Used to change the setting of the [User]. [Administrator] account [Account] [New] Displays the account to change.
  • Page 175 Chapter 4 Settings — [NETWORK] menu [User] account [Account] [OK] Displays the account to change. Determines the change of password. [New] [User name]: Enter the desired new user name. (Up to 16 characters in single byte) [Password]: Enter the desired new password. (Up to 16 characters in single byte) [Password(Retype)]: Enter the desired new password again.
  • Page 176 Chapter 4 Settings — [NETWORK] menu Operation page [Tools], [Info], [Help] [Input Select] Tabs for selecting the setting, information, or help page of the Controls input selection. projector. Not available when the power of the projector is turned off. [POWER] Menu screen control buttons Turns on/off the power.
  • Page 177 Chapter 4 Settings — [NETWORK] menu [Info] page Click [Info] in the operation page. [Projector Name] [Source] Displays the projector name. Displays the selected input. [Mac Address] [Error Status] Displays the MAC address. Displays the error status. [Power Status] [Exit] Displays the status of the power. Returns to the operation page.

  • Page 178: Chapter 5 Maintenance

    Maintenance Chapter 5 This chapter describes methods of inspection when there are problems, maintenance, and replacement of the units. 178 - ENGLISH...

  • Page 179: Lamp/Temperature/Filter Indicators

    Chapter 5 Maintenance — Lamp/temperature/filter indicators Lamp/temperature/filter indicators When an indicator lights up If a problem should occur inside the projector, the lamp indicators <LAMP1>/<LAMP2>/<LAMP3>/<LAMP4>, the temperature indicator <TEMP>, and the filter indicator <FILTER> will inform you by lighting or blinking. Check the status of the indicators and manage the indicated problems as follows.
  • Page 180 (between 1 400 m (4 593') and 2 700 m (8 858') above sea level). If you use the Replacement lamp unit (for portrait mode) together with the smoke cut filter, the operating environment temperature should be between 0 °C (32 °F) and 30 °C (86 °F). (Only for PT-DZ21K2,...

  • Page 181: Maintenance/Replacement

    Chapter 5 Maintenance — Maintenance/replacement Maintenance/replacement Before performing maintenance/replacement f Make sure to turn off the power before maintaining or replacing the unit. (x pages 58, 64) f When switching off the projector, make sure to follow the procedures in “Switching off the projector” (x page 64).
  • Page 182 Chapter 5 Maintenance — Maintenance/replacement f After pulling out the air filter unit, remove large foreign objects and dust from the air filter unit compartment and the air intake port of the projector body if there are any. (Fig. 3) Cleaning the air filter unit Remove the air filter unit beforehand with the previously described procedure of “Removing the air filter unit”.

  • Page 183: Replacing The Unit

    Attention f Panasonic takes no responsibility for any damage or malfunction of the product resulting from use of lamp units which are not manufactured by Panasonic. Use only specified lamp units. f For the portrait setting, be sure to use the Replacement lamp unit (for portrait mode).
  • Page 184 Chapter 5 Maintenance — Maintenance/replacement When to replace the lamp unit The lamp unit is a consumable component. Since its brightness gradually decreases over time, it is necessary to replace the lamp unit regularly. The estimated duration before replacement is 3 000 hours, but the lamp may go off before reaching 3 000 hours, depending on the characteristics of the individual lamp, usage conditions, and the installation environment.
  • Page 185 Chapter 5 Maintenance — Maintenance/replacement Removing the lamp unit WARNING When replacing the lamp unit with the projector installed upward in the vertical direction, make sure to support the lamp unit cover with your hand while loosening the lamp unit cover fixing screw. The lamp unit cover may open on its weight and may drop off, causing a serious accident or injury.
  • Page 186 Chapter 5 Maintenance — Maintenance/replacement f If you loosen the lamp unit cover fixing screw with the projector installed upward in the vertical direction, the lamp unit cover may open on its weight and may drop off. Support the lamp unit cover with your hand when you loosen the lamp unit cover fixing screw.
  • Page 187 Chapter 5 Maintenance — Maintenance/replacement Attach the lamp case. (Fig. 1) f Slowly insert the lamp case into the projector along the grooves for the guide to attach the lamp case, then firmly tighten the lamp case fixing screws (x2). f If the projector is installed upward in the vertical direction, the lamp case may drop off on its weight when fixing it.

  • Page 188: Troubleshooting

    Chapter 5 Maintenance — Troubleshooting Troubleshooting Review the following points. For details, see the corresponding pages. Problems Points to be checked Page f Is the power plug firmly inserted into the outlet? ― f Is the <MAIN POWER> switch set to <OFF>? f Is the wall outlet supplying electricity? ―...
  • Page 189 Chapter 5 Maintenance — Troubleshooting Problems Points to be checked Page f Perform [LENS CALIBRATION]. Lens shift cannot be adjusted. f Is the fixed-focus lens (Model No.: ET-D75LE50) attached? ― f Are the connections between the twisted-pair-cable transmitter and an external ―...

  • Page 190: Self-Diagnosis Display

    Chapter 5 Maintenance — Self-diagnosis display Self-diagnosis display There is a self-diagnosis display on the side of the projector. Self-diagnosis display will automatically display the value of the input supply voltage, or details of errors or warnings when they occur. (x page 28) The following list shows the alphanumeric symbol that is displayed when an error or a warning has occurred and its details.
  • Page 191 Chapter 5 Maintenance — Self-diagnosis display Error/warning display Details Measure FPGA temperature warning f The operating environment temperature is too Power supply temperature error high. Use the projector in an appropriate operating environment temperature FPGA temperature error f Battery replacement is required. Consult your Battery replacement for the internal clock dealer.
  • Page 192 Chapter 5 Maintenance — Self-diagnosis display Error/warning display Details Measure FPGA1/2 configuration error FPGA3 configuration error Lens mounter error Color prism fan 4 error Exhaust fan 1 error Exhaust fan 2 error Exhaust fan 3 error Exhaust fan 4 error Intake fan 1 error Intake fan 2 error Lamp 1 fan error Lamp 2 fan error...

  • Page 193: Chapter 6 Appendix

    Appendix Chapter 6 This chapter describes specifications and after-sales service for the projector. ENGLISH - 193...

  • Page 194: Technical Information

    INPT Input selection RGB2 DVI-D HDMI INPT? Input selection query DIGITAL LINK SDI1 (Only for PT-DZ21K2, PT-DS20K2, PT-DZ16K2) SDI2 (Only for PT-DZ21K2, PT-DS20K2) AVMT Shutter control Shutter function disabled (shutter: open) AVMT? Shutter status query Shutter function enabled (shutter: closed)

  • Page 195: Using Art-Net Function

    CUSTOM MASKING CHANNEL11 ENABLE/DISABLE ENABLE/DISABLE GEOMETRY CHANNEL12 NONE NONE NONE *1 For PT-DZ21K2 and PT-DS20K2. “NONE” for PT-DW17K2 and PT-DZ16K2. r Control details Control details Performance Parameter Default value Remark 100 % Can be set in 256 steps between LIGHT OUTPUT …...
  • Page 196 No operation RGB1 8-15 RGB2 16-23 DVI-D 24-31 HDMI 32-39 DIGITAL LINK 40-47 SDI1 (Only for PT-DZ21K2, 48-55 PT-DS20K2, PT-DZ16K2) INPUT SELECT (when [2] or ― [USER] is selected) SDI2 (Only for PT-DZ21K2, 56-63 PT-DS20K2) No operation 64-119 P IN P OFF...
  • Page 197 5.0s 144-159 7.0s 160-175 10.0s 176-191 No operation 192-255 ― 0-15 KEYSTONE 16-31 CURVED 32-47 PC-1 (Only for PT-DZ21K2, 48-63 PT-DS20K2) GEOMETRY ― PC-2 (Only for PT-DZ21K2, 64-79 PT-DS20K2) PC-3 (Only for PT-DZ21K2, 80-95 PT-DS20K2) CORNER CORRECTION 96-111 No operation...

  • Page 198: Control Commands Via Lan

    Generate a 32-byte hash value from the following data using MD5 algorithm. f “xxxxxx:yyyyy:zzzzzzzz” xxxxxx Administrator rights user name for the web control (default user name is “admin1”) yyyyy Password of above administrator rights user (default password is “panasonic”) zzzzzzzz 8-byte random number obtained in Step 2) 198 - ENGLISH...

  • Page 199: Error Response

    Chapter 6 Appendix — Technical information Command transmission method Transmit using the following command formats. r Transmitted data Termination Header Data section symbol Command Hash value ‘0’ ‘0’ Control command (CR) example (Refer to “Connecting” above) 0x30 0x30 (ASCII string) 0x0d Data length 32 bytes 1 byte...
  • Page 200 Chapter 6 Appendix — Technical information Command transmission method Transmit using the following command formats. r Transmitted data Termination Header Data section symbol Command ‘0’ ‘0’ Control command (CR) example 0x30 0x30 (ASCII string) 0x0d Data length 1 byte 1 byte Undefined length 1 byte f Example: Transmission of power supply status acquisition command...

  • Page 201: Serial In>/ Terminal

    Chapter 6 Appendix — Technical information <SERIAL IN>/<SERIAL OUT> terminal The <SERIAL IN>/<SERIAL OUT> terminal of the projector conforms with RS-232C so that the projector can be connected to and controlled from a computer. Connection Single projector Projector connecting terminals Computer D-Sub 9p (female) D-Sub 9p (male) D-Sub 9p (male)

  • Page 202: Basic Format

    Chapter 6 Appendix — Technical information D-Sub 9-pin (male) Pin No. Signal name Details Outside view ― Received data Transmitted data ― Earth ― Connected internally ― Communication conditions (Factory default) Signal level RS-232C-compliant Sync. method Asynchronous Baud rate 9 600 bps Parity None Character length...

  • Page 203: When Multiple Projectors Are Controlled

    Chapter 6 Appendix — Technical information Attention f If a command is transmitted after the lamp starts illuminating, there may be a delay in response or the command may not be executed. Try sending or receiving any command after 60 seconds. f When transmitting multiple commands, be sure to wait until 0.5 seconds has elapsed after receiving the response from the projector before sending the next command.

  • Page 204: Control Command

    Power standby STANDBY Power query Power on RGB1 RGB2 DVI-D Switching the input HDMI signal DIGITAL LINK SDI1 (Only for PT-DZ21K2, PT-DS20K2, PT-DZ16K2) SDI2 (Only for PT-DZ21K2, PT-DS20K2) QUAD LAMP1/4 LAMP2/3 DUAL LAMP1/2/3 LAMP1/2/4 LAMP1/3/4 Query for lamp selection LAMP2/3/4...
  • Page 205 Chapter 6 Appendix — Technical information Parameter/response Command Details Remark (parameter) string LAMP1 LAMP2 Lamp cumulative LAMP3 runtime query LAMP4 Response is 0000 to 3000 Shutter control OPEN Shutter status query CLOSE DEFAULT/VID AUTO Aspect ratio switch 16:9 THROUGH HV FIT Aspect ratio settings H FIT query...

  • Page 206: Remote 2 In> Terminal

    Chapter 6 Appendix — Technical information <REMOTE 2 IN> terminal It is possible to control the projector remotely (by external contact) from a control panel located away from the projector where remote control signals cannot reach. Use the <REMOTE 2 IN> terminal on the connecting terminals of the projector to connect to the control panel. Remote control Contact control Remote control/contact control...

  • Page 207: Two-Window Display Combination List

    *4 Only for PT-DZ21K2, PT-DS20K2, PT-DZ16K2 *5 Only for PT-DZ21K2, PT-DS20K2 *6 Dual link HD-SDI, dual link 3G-SDI (Only for PT-DZ21K2, PT-DS20K2) Note f In the combination of a, if P IN P function is used with the signals of a different frequency, images in the sub window will not be displayed.

  • Page 208: Control Device Password

    Chapter 6 Appendix — Technical information Control device password To initialize your password, consult your distributor. Upgrade Kit (Only for PT-DZ21K2, PT-DS20K2) If the optional Upgrade Kit (Model No.: ET-UK20) is applied, the following functions are extended. Function Standard status When the Upgrade Kit is applied Adjustment range of Maximum of ±40°...

  • Page 209: List Of Compatible Signals

    Symbols that indicate formats are as follows. g V: VIDEO, Y/C g R: RGB g Y: YC g D: DVI-D g H: HDMI g S: SDI (Only for PT-DZ21K2, PT-DS20K2, PT-DZ16K2) Scanning freq. Plug and play Dot clock Resolution Compatible signal freq.
  • Page 210 Chapter 6 Appendix — Technical information Scanning freq. Plug and play Dot clock Resolution Compatible signal freq. Format DVI-D Horizontal Vertical (Dots) RGB2 HDMI (MHz) (kHz) (Hz) EDID1 EDID2 EDID3 1 024 x 768 39.6 50.0 51.9 R/D/H ― ― ― ―...
  • Page 211 *9 Dual link 3G-SDI is supported. *10 For PT-DZ21K2, PT-DS20K2, when [3D INPUT FORMAT] is set to [AUTO], it is displayed as a 3D image in frame sequential format. To display images in 2D, set [3D INPUT FORMAT] to [NATIVE].
  • Page 212 Chapter 6 Appendix — Technical information List of 3D compatible signals (Only for PT-DZ21K2, PT-DS20K2) The following table specifies the 3D compatible video signals that the projector can project. f Abbreviations for input formats and 3D formats in the table have the following meanings.
  • Page 213 Chapter 6 Appendix — Technical information Scanning freq. HDMI DVI-D Dot clock 3D compatible Resolution freq. Horizontal Vertical signal (Dots) (MHz) (kHz) (Hz) 1 600 x 900 46.4 49.9 96.5 ― ― ― ― ― ― ― 1600 x 900 1 600 x 900 55.9 60.0 119.0...
  • Page 214 Chapter 6 Appendix — Technical information Scanning freq. RGB1/RGB2 SDI1/SDI2 Dot clock 3D compatible Resolution freq. H-D R1-2 S1-2 Horizontal Vertical signal (Dots) TB LBL FS SBS TB LBL 3G (MHz) (kHz) (Hz) 1 600 x 900 46.4 49.9 96.5 ― ―...

  • Page 215: Specifications

    1 049 088 pixels (1 366 x 768 dots) PT-DZ16K2 2 073 600 pixels (1 920 x 1 080 dots) Lens Optional Luminous lamp 432 W, UHM lamp x 4 PT-DZ21K2, PT-DS20K2 20 000 lm (ANSI) Light output PT-DW17K2 17 000 lm (ANSI) PT-DZ16K2 16 000 lm (ANSI)
  • Page 216 (between 1 400 m (4 593') and 2 700 m (8 858') above sea level). If you use the Replacement lamp unit (for portrait mode) together with the smoke cut filter, the operating environment temperature should be between 0 °C (32 °F) and 30 °C (86 °F). (Only for PT-DZ21K2,...
  • Page 217 Horizontal: 15.73 kHz, Vertical: 59.94 Hz; Horizontal: 15.63 kHz, Vertical: 50 Hz Horizontal: 15 kHz to 100 kHz, Vertical: 24 Hz to 120 Hz PIAS (Panasonic Intelligent Auto Scanning) system For RGB signal f Dot clock frequency: 162 MHz or less...
  • Page 218 1 set, RJ-45, for network and DIGITAL LINK connections, PJLink compatible, 100Base-TX, Art-Net <DIGITAL LINK/LAN> terminal compatible *1 Only for PT-DZ21K2, PT-DS20K2 Note f The model numbers of accessories and optional accessories are subject to change without prior notice. 218 - ENGLISH...

  • Page 219: Dimensions

    Chapter 6 Appendix — Dimensions Dimensions Unit: mm 310 (12-7/32") 608 (23-15/16") 244 (9-19/32") 488 (19-7/32") 620 (24-13/32") * Actual dimensions may differ depending on the product. ENGLISH - 219...

  • Page 220: Precautions For Attaching The Ceiling Mount Bracket

    Ask a qualified technician to do the installation work such as mounting the projector on the ceiling. f Panasonic takes no responsibility for any damage to the projector resulting from use of a ceiling mount bracket not manufactured by Panasonic or the inappropriate choice of location for installation, even if the warranty period of the projector has not expired.

  • Page 221: Index

    Index Index 0 – 9 On-screen menu Optional accessories [3D COLOR MATCHING] Early Warning Software [3D FRAME DELAY] [EDGE BLENDING] [3D INPUT FORMAT] <ENTER> button [PICTURE] 79, 83 [3D PICTURE BALANCE] Projector body [PICTURE MODE] [3D SAFETY PRECAUTIONS] Remote control [P IN P] 81, 144 [3D SETTINGS]...
  • Page 222 Index <STATUS> button Remote control 25, 74 Sub memory <S-VIDEO Y/C> button Remote control 25, 71 Switching off the projector Switching on the projector Switching the input signal [SYSTEM DAYLIGHT VIEW] [SYSTEM SELECTOR] Temperature indicator [TEST PATTERN] 81, 146 <TEST PATTERN> button Remote control 25, 74 [TEXT CHANGE]...
  • Page 223 Atıkların atılmasıyla ilgili yanlış uygulamalar yasayla belirlenmiş olan cezalara sebebiyet verebilir. Panasonic Corporation Web Site : http://panasonic.net/avc/projector/ © Panasonic Corporation 2015 Panasonic System Communications Company of North America 5th Floor, Two Riverfront Plaza, Newark, NJ 07102-5490 TEL: (877) 803 - 8492 Panasonic Canada Inc.

This manual is also suitable for:

Pt-ds20k2Pt-dw17k2Pt-dz16k2Pt-dz16k2uPt-dz21k2uPt-ds20k2u ... Show all

Table of Contents