Changing The Scan Settings; Two-Sided Originals - Canon imageRunner 2220i User Manual

Changing the Scan Settings

To match the original you are sending, set the document size, resolution, exposure,
1
and original type. You can also enter detailed settings to send a document
consisting of facing pages as pairs of separate pages.
NOTE
Changed scan settings are not saved. For how to save the changed settings, see
"Storing/Erasing Scanning Mode," on p. 1-131.

Two-Sided Originals

This feature automatically turns over two-sided originals placed in the feeder after
scanning one side to scan both sides.
IMPORTANT
•
When the machine is operating in the Two-sided Original mode, you cannot use the
Document Size Select (Other Size, Long Strip Original) or Two-page Separation mode.
•
Place the original horizontally when scanning originals with sizes such as LTRR and
STMTR. If these originals are placed vertically, the back sides of the original will be sent
upside down.
1
1-86

Changing the Scan Settings

Place your original in the feeder © specify the destination ©
press [Two-sided Original].