Advertisement
ENGLISH
Setting the tare weight
• Switch the appliance on as described previously.
• Press the tare button (1) to set the reading on the
display (3) to zero.
• When using a bowl, first put the empty bowl on the
scale and press the tare button to set the reading on
the display to zero.
Setting the weighing unit
The weighing unit can be set to grams (g) or ounces (oz).
• With the appliance turned on, press the weighing unit
button (2) until the desired units are shown in the
display.
• The weighing unit can be changed at any time while
weighing.
Weighing
• Place the scale on a flat surface.
• Place the product to be weighed on the scale and
read off the weight in the display (3).
• When using a bowl, first correct the tare as described
above. Put the product to be weighed in the bowl,
place the bowl on the scale and read off the weight.
• If the weight exceeds the maximum capacity, the
display will show "o-Ld". To prevent damage to the
appliance, immediately remove the weight from the
scale.
Cleaning, maintenance and storage
Warning! Before cleaning or maintenance, switch the
appliance off.
• To clean the appliance, use only mild soap and a
damp cloth.
• Do not use any abrasive or solvent-based cleaner.
Warning! Do not immerse any part of the appliance in
water or any other liquid.
Checking and replacing the batteries
• If the display (3) shows "Lo", the batteries are too low
and must be replaced.
• Periodically open the battery compartment (5) and
check the batteries for corrosion.
• To replace the batteries, open the battery
compartment and remove the old batteries. Place
new batteries, as indicated by the diagram inside the
compartment.
• When disposing of batteries, follow the instructions
given in the section "Protecting the environment".
Technical data
SK2000
Capacity
Batteries
Batteries
At the end of their useful life, discard batteries with due
care for our environment. Take them to any
authorised repair agent or a local recycling
station.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker
product needs replacement, or if it is of no further use to
you, do not dispose it off with other household waste.
Make this product available for separate collection.
Separate collection of used products and
packaging allows materials to be recycled and
used again. Use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal
waste sites or by the retailer when you purchase a new
product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have
reached the end of their working life. To take advantage
of this service please return your product to any
authorised repair agent who will collect them on our
behalf. You can check the location of your nearest
authorised repair agent by contacting your local Black &
Decker office at the address indicated in this manual. A
list of authorised Black & Decker repair agents and full
details of our after-sales service and contact are
available on the Internet at: www.2helpU.com
-4-
kg
3
3x
AAA
Advertisement
