Admin-Level CGI Commands
Motion Detection Commands
NOTE
Cisco Small Business Network Camera Exported CGI Commands
For each configured coordinate, the left-top corner is the start position. The right-bottom
corner is the stop position:
The replied coordinate always maps to the 640 x 480 scale, regardless of the
current streaming resolution.
Get Motion Detection Settings
Method: GET
URL: http://<IP>/adm/get_group.cgi?group=MOTION
Please refer to
"Get group parameters," on page
Parameter:
Parameter
Description
This is a required parameter & value to let the CGI know the
Group
request is for "motion detection" group.
30.
3
38