Panasonic KX-NCP500 Programming Manual page 29

Default
Current shelf type
Value Range
Shelf type
Slot
Indicates the slot position (reference only).
Default
Current slot number
Value Range
Slot number
Port
Indicates the port number (reference only).
Default
Current port number
Value Range
Port number
Connection
Indicates the port status.
This column offers two ways to open the screen to select the port command:
•
Click the desired cell in the column.
•
Select the desired cell in the column, and then click Command.
Default
Current status
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Session Refresh (Session Timer)—Session Timer Ability
Enables the PBX to periodically refresh SIP sessions by sending repeated requests.
Default
Enable (Passive)
Value Range
Disable: This feature is not activated.
Enable (Active): Activates this feature only if the other device supports the feature.
Enable (Passive): Activates this feature only when requested by the other device.
Document Version 2011-10 Programming Manual for Virtual SIP CO Line Card
3.1.5 Option
29