•
Only one frequency can be monitored
for paging tones at any given time.
When a page is detected, the pager
generates a page alert and stores the
message.
Note: The page alert may be an audible or
a vibrate - depending on the Function
Switch position.
•
In Selective Call mode, the audio will
remain turned off until a page is
received, where upon your pager will
alert, indicating the carrier squelch
operation is enabled. The pager will
then turn the audio off according to
the current Reset mode.
•
Additional programmable options are
Off Duty, Priority Tone Alert,
Push-To-Listen, and Privacy mode.
26
English
Note: Selective Call can be set for up to
five different frequencies, labeled as F1,
F2, F3, F4, and F5.
•
Monitor:
•
This mode allows you to monitor
activity on a programmed frequency
(carrier squelch operation).
•
Only one frequency can be monitored
at a time. When a page is detected,
the pager generates a page alert and
stores the message.
Note: Monitor can be set for up to 5
different frequencies, labeled as F1, F2,
F3, F4, and F5.
•
Probability Scan:
•
This mode allows you to monitor
traffic on two different frequencies.