Download Print this page
Health O Meter 880KL User Instructions

Health O Meter 880KL User Instructions

Advertisement

Quick Links

BEFORE USING SCALE
1. Remove the isolating tab from the battery compartment.
2. The 880KL default mode is pounds. To select a different weight unit, use
a pen or stylus to slide the switch on the bottom of the scale to select the
desired weight unit.
3. Position scale on a firm flat surface.
OPERATING YOUR SCALE
1. Tap scale with foot to initialize. Scale is initialized using vibration.
Standing on top of the platform will not initialize the scale.
2. Scale is ready when "0.0" is displayed.
3. Step on scale platform and stand still for approximately 5 seconds to lock in the weight measurement.
4. Weight measurement will flash on screen. Step off the scale.
5. Screen will hold and display the last captured weight for 10 seconds and then scale will power off.
WARNING INDICATORS
Lo
Replace battery
ERR
Weight exceeds maximum capacity of 440lb / 200kg
ADVICE FOR USE AND CARE
Placing your scale on a hard, even floor will ensure the greatest accuracy and consistency.
Clean your scale with a damp cloth. Do not use chemical cleaning agents.
Do not allow your scale to become saturated with water as this can damage the electronics.
Treat your scale with care – it is a precision instrument. Do not drop it or jump on it. It is not shock proof.
TROUBLESHOOTING GUIDE
If you experience any difficulty in the use of your scale:
Check to make sure the batteries are correctly fitted.
Make sure the scale is on a flat, level floor and not touching a wall.
When you use the scale, if there is no display at all or if "Lo" is displayed – try new batteries.
For technical assistance, contact Customer Service at 1-800-815-6615.
CHANGING THE BATTERIES
When the symbol "Lo" appears, the batteries need to be replaced.
Use ONLY the recommended CR2032 3.0 V Lithium button type batteries. 2 batteries are required for use.
Remove battery cover on the underside of the scale by pushing down on the tab and lifting the cover off of
the unit.
Make sure that the new batteries are inserted with the positive polarity up! Ensure that the batteries are
securely fitted into place. Replace battery cover.
Remove the batteries if the scale will not be used for extended periods of time.
Batteries contain substances that may be harmful to the environment and human health.
WARNING: Discard old batteries carefully, out of reach of young children. Swallowing a battery may be
fatal. If a battery is swallowed, contact the hospital immediately to have it removed.
This symbol indicates that batteries should not be disposed of in the normal household waste but should be taken to
an appropriate local recycling facility when one is available.
Never throw batteries in a fire or attempt to open outer casings, they may explode!
P/N UM880KL REV20151104
MADE IN HUNGARY
1
Model 880KL
Digital Floor Scale
User Instructions

Advertisement

loading

Summary of Contents for Health O Meter 880KL

  • Page 1 1. Remove the isolating tab from the battery compartment. 2. The 880KL default mode is pounds. To select a different weight unit, use a pen or stylus to slide the switch on the bottom of the scale to select the desired weight unit.
  • Page 2 ® ® Health o meter is a registered trademark of Sunbeam Products, Inc. used under license. Health o meter Professional products are manufactured, designed, and owned by Pelstar, LLC. We reserve the right to ® improve, enhance, or modify Health o meter Professional product features or specifications without notice.