Part 3-3: WPA Logon
Step 1: Request CA
Please see to the steps for setting up 802.1x to request CA
Step 2: AP Configuration
1. Log into your Access Point using your WEB Browser (e.g. Internet Explorer). Open security web
page on your Access Point.
2. Select WPA on this page, press "Apply".
3. Go 802.1x Configuration page
•
3. Fill in the configuration fields on this page:
•
Lifetime: How frequently the Key is changed
•
Length: Encryption Length
•
IP: RADIUS Server IP
•
Port: Service Port (Standard RADIUS port 1812)
•
Shared Secret : Share key on RADIUS server (the one you set up for this AP)
Note: If you have a Backup Server please setup RADIUS server 2 as well.