Wi-Fi ® Direct Mode - Motorola SCOUT5000 User Manual

®
5.3 Wi-Fi
Want to take your dog for a walk or go to the dog park and still be able to take
pictures or video? Simply connect via Wi-Fi Direct while on your home network
and off you go!
In this mode, you can use the GPS location tracking function to see where you
are going on the map view. You can also set up Geo Fencing to receive alerts if
your dog ventures out of the virtual boundary. (your smartphone/tablet and the
Pet Camera must be within 300 feet (100 meters) of each other for this function
to work)
• Run Hubble for Petcam App on your smart device and log into your Hubble
account.
• If you have more than 1 Pet Camera in your account:
®
For iOS Devices, tap Devices
TM
For Android
camera list
• The Pet Camera goes into Wi-Fi Direct Mode automatically for up to 10 minutes
when it is powered up. If the Pet Camera is being operated in another mode,
it can be brought back to Wi-Fi Direct Mode for 10 minutes by pressing the
power button
that it is ready for Wi-Fi Direct connection.
• To enter Wi-Fi Direct Mode, tap ENTER WI-FI DIRECT in the upper right corner of
your mobile device screen. It takes approximately 1 minute to establish this
connection and you will hear a voice prompt notifying you that the
connection has been established.
• Tap View Camera at the bottom of the screen and then tap on the video image
to show the options available.
• To exit Wi-Fi Direct Mode, tap EXIT WI-FI DIRECT and then tap OK.
Overview of the Features in Hubble App
Direct Mode
Devices, tap
once shortly. You will hear a voice prompt notifying you
to select a camera from the camera list
> Cameras to select a camera from the
19