Configuration; Status; Wan - Asus Analog Telephone Adapter AX-112 User Manual

3. Configuration

In an Internet browser, enter the WAN IP address that you got either via the
DHCP server or the IVR). You will be taken to the AX-112's web configuration
page, which consists of five menu items for future settings.

. 1 Status

In this page, you will see all the system
status including WAN port status,
IP/MAC address, system uptime and
firmware version.

. 2 WAN

You can either choose to statically
configure or to dynamically configure
the WAN interface (via a DHCP server
on the network, or via PPP if you are
using PPPoE),
If you wish to statically assign the WAN
interface settings: enter the IP address, the subnet mask, the default gateway
IP address, and the DNS server IP address. It is also recommended that the
network domain name be provided as well, to ensure correct DNS operation.
Press "Apply" to save and apply the new settings.
.2.1 NTP server
To automatically obtain the time via the NTP server:
1. Enter the NTP server address for the network (if this address is left blank, a Enter the NTP server address for the network (if this address is left blank, a
default public NTP server will be used, if accessible);
2. Select the time zone�� and elect the time zone�� and
3. Press the "Apply" button to save and apply the new settings.
AX-112 Analog Telephone Adapter
Chapter 3 - Configuration
1