Table of Contents
Advertisement
2.5
ASMB2 configuration
You must configure the network settings of both the remote server and
the local/central server to establish communication for remote server
control and monitoring. Prepare the support CD and a bootable floppy disk
to configure the network settings.
2.5.1
2.5.1
Running the BIOS IPMI configuration
Running the BIOS IPMI configuration
2.5.1
2.5.1
2.5.1
Running the BIOS IPMI configuration
Running the BIOS IPMI configuration
Running the BIOS IPMI configuration
To configure the IPMI in the BIOS:
1.
Restart the remote server, then press <Del> during POST to enter the
BIOS setup.
S e r v e r
S e r v e r
2.
Go to the S e r v e r
S e r v e r
S e r v e r menu, then select the I P M I C o n f i g u r a t i o n
sub-menu. Use this sub-menu to configure the IPMI settings.
3.
When finished, press <F10> to save your changes and exit the BIOS
setup.
Server Features
Remote Access Configuration
IPMI Configuration
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
IPMI Configuration
IPMI Configuration
IPMI Configuration
IPMI Configuration
IPMI Configuration
IPMI Configuration
BMC Firmware version:
Boot Option Uses
OS Boot Timeout
Timeout Value
Clear System Even Log
BMC Time Sync.
System Event Log
LAN Setting
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
A S U S A S M B 2
A S U S A S M B 2
A S U S A S M B 2
A S U S A S M B 2
A S U S A S M B 2
BIOS SETUP UTILITY
Server
BIOS SETUP UTILITY
Server
1.00-1.00
[System]
[Disabled]
[
0]
[Disabled]
[Enabled]
I P M I C o n f i g u r a t i o n
I P M I C o n f i g u r a t i o n
I P M I C o n f i g u r a t i o n
I P M I C o n f i g u r a t i o n
Select Screen
Select Item
+-
Change Option
F1
General Help
F10 Save and Exit
ESC Exit
System: Boot Option
is controlled by
BIOS.
BMC: Boot Option is
controlled by BMC.
Select Screen
Select Item
+-
Change Option
F1
General Help
F10 Save and Exit
ESC Exit
2 - 7
2 - 7
2 - 7
2 - 7
2 - 7
Advertisement
Table of Contents
