Table of Contents
Advertisement
Quick Links
Advertisement
Chapters
Table of Contents
Related Manuals for Asus Dual TualatinTM Motherboard TRL-DLS
Summary of Contents for Asus Dual TualatinTM Motherboard TRL-DLS
- Page 1 TRL-DLS Dual Tualatin™ Motherboard USER’S MANUAL...
- Page 2 Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
-
Page 3: Asus Contact Information
Desktop/Server (Tel): +886-2-2890-7123 (English) Support Fax: +886-2-2890-7698 Support Email: tsd@asus.com.tw Web Site: www.asus.com.tw Newsgroup: cscnews.asus.com.tw ASUS COMPUTER INTERNATIONAL (America) Address: 6737 Mowry Avenue, Mowry Business Center, Building 2, Newark, CA 94560, USA General Fax: +1-510-608-4555 General Email: tmd1@asus.com Technical Support... -
Page 4: Table Of Contents
1. INTRODUCTION ... 7 1.1 How This Manual Is Organized ... 7 1.2 Item Checklist ... 7 2. FEATURES ... 8 2.1 ASUS TRL-DLS Motherboard ... 8 2.1.1 Specifications ... 8 2.1.2 Performance ... 10 2.1.3 Intelligence ... 11 2.2 TRL-DLS Motherboard Components ... 12 2.2.1 Component Locations ... - Page 5 4.5.2 Hardware Monitor ... 58 4.6 Boot Menu ... 59 4.7 Server Menu ... 61 4.8 Exit Menu ... 62 5. OS Driver Installation ... 65 (Turn to page 66 for detailed contents on OS Drivers) ASUS TRL-DLS User’s Manual...
-
Page 6: Federal Communications Commission Statement
Radio Interference Regulations of the Canadian Department of Communications. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. ASUS TRL-DLS User’s Manual... -
Page 7: Introduction
(1) Ribbon cable for a 3.5” floppy disk drive (1) Motherboard Support CD (1) Socket 370 CPU Terminator (UMB type) (1) User’s Manual ASUS TRL-DLS User’s Manual Manual information and checklist Production information and specifications Instructions on setting up the motherboard. -
Page 8: Features
2. FEATURES ASUS TRL-DLS Motherboard The ASUS TRL-DLS motherboard is designed for server systems that require flexible configurations. Powered by dual Intel processors, the TRL-DLS efficiently complies with today’s demand for a high- integration server. 2.1.1 Specifications • Processor Support: Supports dual Socket 370-based Intel Pentium III Coppermine (256KB L2) and Tualatin (512KB L2) processors running up to 1.53+GHz with 133MHz Front Side Bus (FSB) frequency. - Page 9 Integrated IOAPIC: Supports full 32-APIC entries and removes the need for a separate IOAPIC chip. • ASUS Server Management Card: The optional ASMC-LE, ASMC-ME, and ASMC-HE cards support Intelligent Platform Management Interface (IPMI), system health monitor, and LAN security mode solutions to achieve server reliability, availability, and serviceability requirements.
-
Page 10: Performance
• ACPI Ready: Advanced Configuration and Power Interface (ACPI) is also implemented on all ASUS smart series motherboards. ACPI provides more Energy Saving Features for future operating systems (OS) supporting OS Direct Power Management (OSPM) functionality. With these features implemented in the OS, PCs can be ready around the clock, yet satisfy all the energy saving standards. -
Page 11: Intelligence
Server Management: The motherboard comes with an ASMC card connector (supports the optional ASMC-LE and ASMC-ME cards) that complies with server reliability, availability, and serviceability requirements. Remote management response via remote diagnostics and troubleshooting still works even when the operating system has frozen. ASUS TRL-DLS User’s Manual... -
Page 12: Trl-Dls Motherboard Components
SCSI Features Adaptec AIC7899W 64-bit 66MHz SCSI controller ... 10 Ultra160 SCSI Connectors ... 9 Hardware Monitoring System Voltage Monitoring (integrated in ASUS ASIC) ... 15 (4) Fan Power & Speed Monitoring Connectors (see layout on p. 14) Power EATX 24-pin Power Supply Connector ... 2 +12V 8-pin Power Supply Connector ... -
Page 13: Component Locations
2. FEATURES 2.2.1 Component Locations ASUS TRL-DLS User’s Manual 15 14... -
Page 14: Hardware Setup
PCI5 (32-bit, 33MHz 5V) Controller WOL_CON PCI6 (32-bit, 33MHz 5V) ERMC NOTE: The SCSI and eRMC components are optional. These are grayed out in the above motherboard layout. ASUS TRL-DLS User’s Manual 33.2cm (13.07in) CPUFAN1 ® ® ServerWorks CNB20 HESL... -
Page 15: Layout Contents
28 CPU Fan Connectors (two 3-pin) SYSFAN1/2 p. 28 System Fan Connectors (two 3-pin) p. 29 SMBus Connector (6-1 pins) eRMC p. 29 ASUS Server Management Card Connector (50-pin) 10) ATXPWR, p. 30 ATX Power Supply Connector (20/24-pin) CON12V p. -
Page 16: Hardware Setup Procedure
3.4 Jumper Settings There is only one jumper on the motherboard. This jumper allows you to set the speed for the PCI slots. ® TRL-DLS TRL-DLS PCI Slot Setting ASUS TRL-DLS User’s Manual P1_66EN Normal Force 33Mhz (Default) -
Page 17: System Memory
SDRAM 128MB, 256MB, 512MB, 1GB Total System Memory (Max. 6GB) IMPORTANT: The system chipset only supports 64Mbit, 128Mbit, and 256Mbit “registered” SDRAMs with ECC. Make sure to use only the specified DIMM types for smooth system operation. ASUS TRL-DLS User’s Manual Total Memory... -
Page 18: Memory Installation
DIMM slot on the motherboard. You must tell your retailer the correct DIMM type before purchasing. This motherboard supports four clock signals per DIMM. ASUS TRL-DLS User’s Manual... -
Page 19: Central Processing Unit (Cpu)
It is important that you match the marked corner of the CPU and terminator with the corresponding corner on the socket so as not to damage the CPU pins. ASUS TRL-DLS User’s Manual Pentium III (Coppermine) -
Page 20: Installing The Cpu And Terminator
7. Install the CPU terminator the same way as you would install a CPU. The figure on the right shows an installed CPU terminator. CAUTION! DO NOT install a heatsink on the terminator! It will damage the motherboard! ASUS TRL-DLS User’s Manual... -
Page 21: Expansion Slots
1. Turn on the system and change the necessary BIOS settings, if any. See Chapter 4 for information on BIOS setup. 2. Assign an IRQ to the card. Refer to the tables on the next page. 3. Install the software drivers for the expansion card. ASUS TRL-DLS User’s Manual... - Page 22 3 (64-bit) PCI 5 4 (64-bit) PCI 8 5 (32-bit) PCI 9 6 (32-bit) PCI 10 ASUS TRL-DLS User’s Manual Standard Function System Timer Keyboard Controller Programmable Interrupt Communications Port (COM2) Communications Port (COM1) Sound Card (sometimes LPT2) Floppy Disk Controller...
-
Page 23: Pci Configuration Diagram
PCI-3 CIOB20 PCI Bus 64-bit 64-bit 64-bit (66/33MHz) Third PCI Bus (66/33MHz) Adaptec SCSI 7899W PCI-4 64-bit ASUS TRL-DLS User’s Manual Socket 370 Socket 370 133 MHz Cntl Registered DIMM CNB20HE-SL 133MHz Primary PCI Bus (33MHz) Intel 82550 PCI-5 PCI-6... -
Page 24: Connectors
– one for the primary IDE connector and another for the secondary IDE connector. ® TRL-DLS TRL-DLS IDE Connectors ASUS TRL-DLS User’s Manual PIN 1 PIN 1 NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1. - Page 25 Up is enabled (see 4.5.1 Power Up Control) and that your system has an ATX power supply with at least 720mA +5V standby power. ® TRL-DLS TRL-DLS Wake-On-LAN Connector ASUS TRL-DLS User’s Manual NOTE: Orient the red markings on the floppy ribbon cable to PIN 1. PIN 1 IMPORTANT: Requires an ATX power...
- Page 26 When any chassis component is removed, the sensor triggers and sends a high- level signal to this connector to record a chassis intrusion event. ® TRL-DLS TRL-DLS Chassis Intrusion Lead ASUS TRL-DLS User’s Manual Ground Ring# CHASSIS...
-
Page 27: Scsi Connection Notes
® TRL-DLS TRL-DLS SCSI Connection Example NOTE: Ultra160 SCSI devices do not have termination jumpers and must use a separate terminator on the last connector (internal) or device (external). ASUS TRL-DLS User’s Manual SCSI-A 68-Pin Ultra160/ Ultra2-Wide SCSI Connector SCSI-B... - Page 28 CPU and onboard heatsinks. Damage may occur to the motherboard and/or the CPU fan if these pins are incorrectly used. These are not jumpers, do not place jumper caps over these pins. ® TRL-DLS TRL-DLS 12-Volt Cooling Fan Power ASUS TRL-DLS User’s Manual CPUFAN1 SYSFAN2 +12V Rotation CPUFAN2...
- Page 29 PCI6 slot and connect the cable from the card to this connector. The PCI6 slot on the motherboard has a Low Pin Count (LPC) signal connector to accommodate the ASMC card. ® TRL-DLS TRL-DLS ASMC Connector ASUS TRL-DLS User’s Manual C bus,...
- Page 30 It is recommended that you purchase a power supply with 24-pin power connector. ® TRL-DLS TRL-DLS ATX Power Connector ASUS TRL-DLS User’s Manual 8-pin CON12V ATXPWR 24-pin Power Connector...
- Page 31 Adaptec 7899W SCSI controller. The card supports RAID levels 0, 1, 5, multilevel 0/1 and 0/5, cache memory modules with ECC, and predictive caching capability. (Contact Adaptec for more information if you bought the Adaptec 2000S RAID card.) ® TRL-DLS TRL-DLS Zero Channel RAID ASUS TRL-DLS User’s Manual PIN 1...
- Page 32 14) System Panel Connector (20-pin PANEL) This connector is for different front panel functions. See opposite page for the description of the connector leads. ® TRL-DLS TRL-DLS System Panel Connectors ASUS TRL-DLS User’s Manual USBPORT Connector 1 & 12 NIC Activity LED 2 & 3 Status LED 6 &...
- Page 33 This shows the status of the NIC through a panel-mounted LED. • Status LED (2-pin) This shows the system status as programmed through the ASUS ASIC. • ATX Power Switch / Soft-Off Switch Lead (2-pin) The system power is controlled by a momentary switch connected to this lead.
-
Page 34: Starting Up The First Time
The power supply should turn off after Windows shuts down. NOTE: The message “You can now safely turn off your computer” does not appear when shutting down with ATX power supplies. ASUS TRL-DLS User’s Manual Meaning No error during POST... -
Page 35: Bios Setup
4. In DOS mode, type A:\AFLASH <Enter> to run AFLASH. IMPORTANT! If the word “unknown” appears after Flash Memory:, the memory chip is either not programmable or is not supported by the ACPI BIOS and therefore, cannot be programmed by the Flash Memory Writer utility. ASUS TRL-DLS User’s Manual... -
Page 36: Bios Setup
5. Select 1. Save Current BIOS to File from the Main menu and press <Enter>. The Save Current BIOS To File screen appears. 6. Type a filename and the path, for example, A:\XXX-XX.XXX and then press <Enter>. ASUS TRL-DLS User’s Manual... -
Page 37: Updating Bios Procedures
BIOS revision will solve your problems. Careless updating can result to more problems with the motherboard! 1. Download an updated ASUS BIOS file from the Internet (WWW or FTP) (see ASUS CONTACT INFORMATION on page 3 for details) and save to the boot floppy disk you created earlier. - Page 38 BIOS file you saved to the boot disk. If the Flash Memory Writer utility is not able to successfully update a complete BIOS file, the system may not boot. If this happens, call the ASUS service center for support.
-
Page 39: Bios Setup Program
POST. NOTE: Because the BIOS software is constantly being updated, the following BIOS setup screens and descriptions are for reference purposes only, and may not exactly match what you see on your screen. ASUS TRL-DLS User’s Manual... -
Page 40: Bios Menu Bar
Brings up a selection menu for the highlighted field <Home> or <PgUp> Moves the cursor to the first field <End> or <PgDn> Moves the cursor to the last field <F5> Resets the current screen to its Setup Defaults <F10> Saves changes and exits Setup ASUS TRL-DLS User’s Manual... -
Page 41: General Help
Item Specific Help window located to the right of each menu. This window displays the help text for the currently highlighted field. NOTE: The item heading in square brackets represents the default setting for that field. ASUS TRL-DLS User’s Manual... -
Page 42: Main Menu
Floppy 3 Mode Support [Disabled] This is required to support older Japanese floppy drives. The Floppy 3 Mode feature allows reading and writing of 1.2MB (as opposed to 1.44MB) on a 3.5-inch diskette. Configuration options: [Disabled] [Enabled] ASUS TRL-DLS User’s Manual... - Page 43 (4) re-install the cell battery, (5) plug the power cable and turn on the computer, (6) hold down the <Del> key during the boot process to enter BIOS Setup and re-enter CMOS data. ® TRL-DLS TRL-DLS Clear RTC RAM ASUS TRL-DLS User’s Manual Short solder points R216 to Clear CMOS ASUS ASIC...
-
Page 44: Primary & Secondary Master/Slave
CAUTION! Before attempting to configure a hard disk drive, make sure you have the correct configuration information supplied by the drive manufacturer. Incorrect settings may cause the system to fail to recognize the installed hard disk. ASUS TRL-DLS User’s Manual... - Page 45 After making your selections on this sub-menu, press the <Esc> key to return to the Main menu. When the Main menu appears, the hard disk drive field displays the size for the hard disk drive that you configured. ASUS TRL-DLS User’s Manual...
- Page 46 This field allows you to enable or disable the S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) system that utilizes internal hard disk drive monitoring technology. This parameter is normally disabled because the resources used in the SMART monitoring feature may decrease system performance. Configuration options: [Disabled] [Enabled] ASUS TRL-DLS User’s Manual...
-
Page 47: Keyboard Features
6 to 30 characters per second. Configuration options: [6/Sec] [8/Sec] [10/Sec] [12/Sec] [15/Sec] [20/Sec] [24/Sec] [30/Sec] Keyboard Auto-Repeat Delay [1/4 Sec] This field sets the time interval for displaying the first and second characters. Configuration options: [1/4 Sec] [1/2 Sec] [3/4 Sec] [1 Sec] ASUS TRL-DLS User’s Manual... -
Page 48: Advanced Menu
This functions as an update loader integrated into the BIOS to supply the processor with the required data. In the default position of [Enabled], the BIOS will load the update on all processors during system bootup. Configuration options: [Disabled] [Enabled] ASUS TRL-DLS User’s Manual... - Page 49 If not detected, the USB controller legacy mode is disabled. When you set this field to [Disabled], the USB controller legacy mode is disabled whether or not you are using a USB device. Configuration options: [Disabled] [Enabled] [Auto] ASUS TRL-DLS User’s Manual...
-
Page 50: Chip Configuration
Configuration options: [UC] [USWC] Onboard PCI IDE Enable [Both] You can select to enable the primary IDE channel, both the primary and secondary channels, or disable both channels. Configuration options: [Both] [Primary] [Disabled] ASUS TRL-DLS User’s Manual... -
Page 51: I/O Device Configuration
[EPP] allows bidirectional parallel port operation; [ECP] allows the parallel port to operate in bidirectional DMA mode; [ECP+EPP] allows normal speed operation in a two-way mode. Configuration options: [Normal] [EPP] [ECP] [ECP+EPP] ASUS TRL-DLS User’s Manual... -
Page 52: Pci Configuration
Setting this field to [Enabled] corrects this problem. If you are using standard VGA cards, leave this field to the default setting [Disabled]. Configuration options: [Disabled] [Enabled] PCI Latency Timer [32] Leave on default setting for best performance vs. stability. ASUS TRL-DLS User’s Manual... - Page 53 Onboard LAN Boot ROM [Disabled] Onboard 2nd LAN Boot ROM [Disabled] When set to [Enabled], these fields allow the system to boot from the network using the onboard LAN controller boot ROM. Configuration options: [Disabled] [Enabled] ASUS TRL-DLS User’s Manual...
-
Page 54: Power Menu
Windows 3.x and Windows 95, you need to install Windows with the APM feature. For Windows 98 and later, APM is automatically installed. A battery and power cord icon labeled “Power Management” appears in the “Control Panel.” Choose “Advanced” in the Power Management Properties dialog box. ASUS TRL-DLS User’s Manual... - Page 55 4 seconds puts the system in sleep mode. Regardless of the setting, holding the ATX switch for more than 4 seconds powers off the system. Configuration options: [Soft off] [Suspend] ASUS TRL-DLS User’s Manual...
-
Page 56: Power Up Control
LAN device, or the PCI modem card if present. Configuration options: [Disabled] [Enabled] IMPORTANT: This feature requires an optional network interface card with Wake- On-LAN feature and an ATX power supply with at least 720mA +5V standby power. ASUS TRL-DLS User’s Manual... - Page 57 [By Date]. NOTE: Automatic Power Up will not work if the system is powered down by operating systems, such as Windows 98, which have ACPI support enabled. Configuration options: [Disabled] [Everyday] [By Date] ASUS TRL-DLS User’s Manual...
-
Page 58: Hardware Monitor
NOTE: If any of the monitored items is out of range, the following error message appears: “Hardware Monitor found an error. Enter Power setup menu for details”. You will then be prompted to “Press F1 to continue or DEL to enter SETUP”. ASUS TRL-DLS User’s Manual... -
Page 59: Boot Menu
This field allows you to select which ATAPI CD-ROM drive to use in the boot sequence. Pressing [Enter] shows the product IDs of all your connected ATAPI CD- ROM drives. Other Boot Device Select [INT18 Device (Network)] Configuration options: [Disabled] [SCSI Boot Device] [INT18 Device (Network)] ASUS TRL-DLS User’s Manual... - Page 60 This field speeds up the Power-On-Self Test (POST) routine by skipping retesting a second, third, and fourth time. Configuration options: [Disabled] [Enabled] Boot Up Floppy Seek [Enabled] When enabled, the BIOS seeks the floppy disk drive once during bootup. Configuration options: [Disabled] [Enabled] ASUS TRL-DLS User’s Manual...
-
Page 61: Server Menu
Set this item to Enabled to avoid PCI/DRAM overlay if your installed system memory is greater than 4GB. Configuration options: [Disabled] [Enabled] DIMM Pair 0, DIMM Pair 1, DIMM Pair 2 These memory fields display the auto-detected system memory. ASUS TRL-DLS User’s Manual... -
Page 62: Exit Menu
This option should only be used if you do not want to save the changes you have made to the Setup program. If you have made changes to fields other than system date, system time, and password, the system will ask for confirmation before exiting. ASUS TRL-DLS User’s Manual... - Page 63 This option saves your selections without exiting the Setup program. You can then return to other menus and make changes. After selecting this option, all selections are saved and a confirmation is requested. Select [Yes] to save any changes to the non-volatile RAM. ASUS TRL-DLS User’s Manual...
- Page 64 4. BIOS SETUP ASUS TRL-DLS User’s Manual...
-
Page 65: Os Driver Installation
TRL-DLS Dual Tualatin™ Motherboard 5. OS Driver Installation... - Page 66 SCSI Driver Installation ... 86 ® II. Intel 82550 Network Driver Installation ... 86 ® III. ATI Rage XL Display Driver Installation ... 86 ASUS TRL-DLS User’s Manual Contents ® NT Server 4.0 ... 67 ® 2000 Server ... 73 ®...
-
Page 67: Microsoft ® Windows ® Nt Server 4.0
“Ultra160 FMS v1.11 for Microsoft Windows NT 4.0 Setup Disk.” A. Preparing an Adaptec Driver Disk Insert the ASUS TRL-DLS support CD into your CD-ROM drive. Run the Adaptec Disk Creation Utility from the following path: \Drivers\Adaptec\fmsutil.exe The following window appears. -
Page 68: New System Installation
Adaptec driver diskette containing the Windows NT driver required to support your Adaptec adapter(s) and press Enter. The driver files are distributed with ASUS Driver Support CD and are created from above “Preparing an Adaptec Driver Diskette” Section. - Page 69 Adaptec driver diskette containing the Windows NT driver required to support your Adaptec adapter(s) and press Enter. The driver files are distributed with ASUS Driver Support CD and are created from the previous section for “Preparing an Adaptec Driver Diskette”.
-
Page 70: Existing System Installation
Do you want to restart your computer now?” Click on the Yes button to restart and reboot Windows NT. If you choose Cancel, remember that you must restart before the new driver loads. 11. Rebooting loads your new miniport driver(s). ASUS TRL-DLS User’s Manual... -
Page 71: Intel ® 82550 Network Driver Installation
If you need to use a floppy disk to install the on-board Intel 82550 network adapter drivers, use the dcreat.exe utility located in the \Drivers\LAN\MAKEDISK directory in the ASUS Support CD. Make sure you have a 1.44 MB formatted, non-bootable diskette in the floppy drive when using this utility. -
Page 72: Ati Rage Xl Display Driver Installation
Click OK to finish and configure any protocols as prompted Restart Windows NT when prompted. ® Rage XL Display Driver Installation Insert the ASUS TRL-DLS support CD into your CD-ROM drive. Install the display driver from the following path: \Drivers\Display\Nt40\Setup.exe Follow the screen instructions to complete the installation. -
Page 73: Microsoft Windows 2000 Server
10. A list of suitable drivers appears. The entry for the upgrade driver can be verified by scrolling the display to the right, and viewing the Location field. Highlight the driver for the upgrade installation disk and click on the Next button. ASUS TRL-DLS User’s Manual ® Windows 2000 Server... - Page 74 12. The system will load the driver from the Adaptec driver diskette. A message box may appear indicating that the target (existing) driver is newer than the source (upgrade) driver. Click No to cancel the driver upgrade at this point or click Yes to continue the installation. ASUS TRL-DLS User’s Manual...
-
Page 75: Intel ® 82550 Network Driver Installation
Click Have Disk…. Select A: floppy disk for the network driver and click Select “Intel® PRO/100+ PCI Adapter” from the listed Network Adapters. Click Next. The system prompts you with an Update Driver message. Click Yes to continue installing driver. ASUS TRL-DLS User’s Manual... -
Page 76: Ati Rage Xl Display Driver Installation
Rage XL Display Driver Installation Windows 2000 system can correctly recognize ATI RAGE XL PCI driver during system installation. You do not need to load any driver for supporting the onboard ATI RAGE XL graphics chip. ASUS TRL-DLS User’s Manual... -
Page 77: Microsoft Windows Xp Professional
Setup Disk” or “Ultra160 FMS v1.11 for Novell Netware version 5.xx Setup Disk”. A. Preparing an Adaptec Driver Disk Insert the ASUS TRL-DLS support CD into your CD-ROM drive. Run the Adaptec Disk Creation Utility from the following path: \Drivers\Adaptec\fmsutil.exe ASUS TRL-DLS User’s Manual... - Page 78 When prompted, insert the floppy disk that you labeled “Ultra160 FMS v1.11 for Novell Netware version 3.1x/4.xx Setup Disk” or “Ultra160 FMS v1.11 for Novell Netware version 5.xx Setup Disk” Press Enter and follow the succeeding screen instructions. ASUS TRL-DLS User’s Manual...
-
Page 79: Netware 5.X New Installations
Adaptec driver for NetWare diskette into drive A: Then use the INS key to select an unlisted driver. A dialog box appears. If the driver diskette is in the A: drive, press Enter to continue. The ADPT160M.HAM driver appears as a selection. ASUS TRL-DLS User’s Manual... -
Page 80: Intel ® 82550 Network Driver Installation
Use the manual to create driver diskette. If you need to use a floppy disk to install the on-board Intel 82550 network adapter drivers, use the MAKEDISK.BAT utility located in the \Drivers\LAN\MAKEDISK directory on ASUS Driver Support CD. MAKEDISK [operating system] [destination] ASUS TRL-DLS User’s Manual... -
Page 81: Netware 4.Xx And 5.X Installations
Add or check the load and bind statements you need to the server’s AUTOEXEC.NCF file so the PRO/100+ adapter driver loads automatically load and bind the server driver as follows: LOAD CE100B SLOT=x FRAME=ETHERNET_802.2 BIND IPX TO CE100B NET=xxxxxxxx ASUS TRL-DLS User’s Manual... -
Page 82: Ati Rage Xl Display Driver Installation
Rage XL Display Driver Installation User can select the “Super VGA” for the X Server on NetWare 5.x server system. The other NetWare system didn’t support X Server and user didn’t need the VGA driver support. ASUS TRL-DLS User’s Manual... -
Page 83: Sco Openserver 5.0.X
“Ultra160 FMS v1.11 for SCO Unixware 7.x Setup Disk” or “Ultra160 FMS v1.11 for SCO OpenServer 5.0.x Setup Disk”. A. Preparing an Adaptec Driver Disk Insert the ASUS TRL-DLS support CD into your CD-ROM drive. Run the Adaptec Disk Creation Utility from the following path: \Drivers\Adaptec\fmsutil.exe Select Ultra160 FMS 1.11 from the options that appear. - Page 84 When prompted, insert the floppy disk that you labeled “Ultra160 FMS v1.11 for SCO Unixware 2.1x Setup Disk” or “Ultra160 FMS v1.11 for SCO Unixware 7.x Setup Disk” or “Ultra160 FMS v1.11 for SCO OpenServer 5.0.x Setup Disk”. Press Enter and follow the succeeding screen instructions. ASUS TRL-DLS User’s Manual...
-
Page 85: Intel ® 82550 Network Driver Installation
You don’t need to load or modify the network driver for the onboard LAN device. You can find the Intel 82550 Network driver from ASUS TRL-DLS support CD at \Drivers\Lan\UNIX\SCO5 Instructions for Installing the eeE Driver for SCO OpenServer Copy the eee.vol file to any directory, say /tmp, on the SCO system,... -
Page 86: Linux Redhat 7.X
Rage XL Display Driver Installation The RedHat 7.x system can correctly recognize ATI Rage XL graphic controller (ATI RAGE PRO/LT-PRO/XL/Mobility P/M/M1) during installation. You don’t need to load or modify the video driver for the onboard VGA device. ASUS TRL-DLS User’s Manual...