ENGLISH (Original instructions) SPECIFICATIONS Model BHP460 Concrete 16 mm Steel 13 mm Capacities Wood 38 mm Wood screw 10 mm x 90 mm (3/8" x 3-1/2") Machine screw 6 mm High 0 - 1,500 No load speed (min 0 - 460...
Do not use any Makita Corporation responsible adapter plugs with earthed (grounded) power manufacturer declare that the following Makita tools. Unmodified plugs and matching outlets will machine(s): reduce risk of electric shock. Designation of Machine:...
Page 4
away from moving parts. Loose clothes, terminal another. Shorting the battery jewellery or long hair can be caught in moving terminals together may cause burns or a fire. parts. 27. Under abusive conditions, liquid may be 16. If devices are provided for the connection of ejected from the battery;...
failure to follow the safety rules stated in this Let a hot battery cartridge cool down before instruction manual may cause serious personal charging it. injury. Charge the Nickel Metal Hydride battery ENC005-2 cartridge when you do not use it for more than six months.
properly and returns to the "OFF" position when Do not use the speed change lever while the tool is • released. running. The tool may be damaged. To start the tool, simply pull the switch trigger. Tool speed Selecting the action mode is increased by increasing pressure on the switch trigger.
any work on the tool. Adjustable depth rod Installing side grip (auxiliary handle) 1. Depth rod 2. Clamp screw 1. Teeth 2. Grip base 3. Side grip 002471 The adjustable depth rod is used to drill holes of uniform 002427 depth.
15 minutes before proceeding with a fresh battery. Blow-out bulb (optional accessory) Drilling operation 1. Blow-out bulb CAUTION: Pressing excessively on the tool will not speed up • the drilling. In fact, this excessive pressure will only serve to damage the tip of your bit, decrease the tool performance and shorten the service life of the tool.
1 minute. Then check the tool while running and electric brake operation when releasing the switch trigger. If electric brake is not working well, ask your local Makita service center for repair. To maintain product SAFETY and RELIABILITY, repairs,...
Page 12
Makita Corporation Anjo, Aichi, Japan 884324H226...