Quick troubleshooting
Handset shows:
"No link to base. Move closer to base, try again."
Place the handset on the base unit, then
check if the charge indicator is on.
L Model shown is BB-GT1500.
The charge indicator is OFF.
Unplug the AC adaptor of the base unit and remove the
battery from the handset, then plug in the AC adaptor and
insert the battery into the handset again. Try re-registration
as explained later in this guide.
Your telephone may need service.
Unplug and then plug AC
adaptor properly to both the
base unit and AC outlet.
Lift the handset, then try again.
If handset still shows the same
message, try re-registration as
explained later in this guide.
– 8 –
The charge indicator
is ON.
Re-registration failed.
Re-registration failed.