Installing A Sata Hard Disk Drive - Asus Gaming Machine Chassis Kit VENTO 3600 User Manual

2.5.2 2.5.2

Installing a SATA hard disk drive

Installing a SATA hard disk drive
2.5.2 2.5.2 2.5.2 Installing a SATA hard disk drive Installing a SATA hard disk drive Installing a SATA hard disk drive
To install a S e r i a l A T A S e r i a l A T A S e r i a l A T A hard disk drive: S e r i a l A T A
S e r i a l A T A
1. Follow steps 1 to 5 of the previous section.
2. Connect one end of the 7-pin
SATA cable to the SATA
connector at the back of the
drive then connect the other
end to a SATA connector on
the motherboard. Refer to
the motherboard
documentation for the
location of the SATA
connectors
3. For Serial ATA HDDs with a 4-
pin power connector:
Connect a 4-pin (female)
power plug from the power
supply unit (PSU) to the 4-pin
(male) power connector at the
back of the drive.
For Serial ATA HDDs without a
4-pin power connector:
Use a SATA power cable.
Connect a 4-pin plug (female)
from the PSU to the 4-pin
(male) plug of the SATA
power cable. Connect the
15-pin SATA power plug to
the power connector at the
back of the drive.
A S U S V E N T O 3 6 0 0 A S U S V E N T O 3 6 0 0
A S U S V E N T O 3 6 0 0 A S U S V E N T O 3 6 0 0 A S U S V E N T O 3 6 0 0
1 5 - p i n 1 5 - p i n 1 5 - p i n 1 5 - p i n 1 5 - p i n
4 - p i n ( m a l e ) 4 - p i n ( m a l e ) 4 - p i n ( m a l e ) 4 - p i n ( m a l e ) 4 - p i n ( m a l e )
S e r i a l A T A p o w e r c a b l e S e r i a l A T A p o w e r c a b l e S e r i a l A T A p o w e r c a b l e S e r i a l A T A p o w e r c a b l e S e r i a l A T A p o w e r c a b l e
2 - 9 2 - 9
2 - 9 2 - 9 2 - 9