Asus R300 User Manual page 70

• Start: use the Cursor as the departure point for your route. This menu point is available
only in Map mode and when there is no active route. In Cockpit mode the departure point of
the route is always the GPS position or if it is not available, the last known GPS position.
• Route To: use the Cursor as the destination of your route. This button is to start a new
route. The previous route (if it exists) will be deleted and replaced. If a multi-point route is
active, ASUS GO will ask you whether you really want to delete it together with all its via
points.
• Add Via: by inserting the selected map point as a via, you instruct ASUS GO to cross this
location before the destination of the route. This is the way to build a multi-point route in
reverse order (when you wish to insert a stopover 'go to A but first get some fuel at B' or
want to influence the direction of the route). This menu point works only if a route is already
active.
• Remove Via: removes the 'via point' near or at the Cursor. The route will be recalculated
immediately excluding the deleted point. This menu point replaces Add Via and is available
only if the Cursor is near or at a via point.
• Continue: add a new destination to be reached after the previous destination. The new
destination replaces the old one, which is now demoted to a via point. This is the way to
build your multi-point route in straight order (when you wish to visit several destinations 'go
to A then to B'). This menu point is available only if a route is already active.
• Pin: push a coloured pin in the map at the selected point for later use. This pin is visible
at all zoom levels and also appears in the History list together with its exact position. The
colour of the pin is automatically selected by ASUS GO.
• Unpin: remove the pin near or at the Cursor. This menu point replaces Pin and is available
only if the selected point is near or at a pin.
0