Contents 1 Important 2 Your Portable Speaker Introduction What's in the box 3 Get started Charge the built-in battery Power on/off 4 Use Bluetooth devices Connect a device Play audio via Bluetooth Make a call Clear the pairing history 5 Listen to an external device 6 Adjust volume 7 Product information General information...
1 Important Caution • Removal of the built-in battery invalidates the warranty and may destroy the product. • Read these instructions. • Heed all warnings. Always bring your product to a professional to • Follow all instructions. remove the built-in battery. •...
2 Your Portable Speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this speaker, you can • listen to audio from an external device via Bluetooth connection, • listen to audio from an external device through the micro USB socket, and •...
3 Get started Power on/off Press to power it on or off. Always follow the instructions in this chapter in sequence. Charge the built-in battery The speaker is powered by a built-in rechargeable battery. Note Note • If the USB cable is connected to the micro USB socket, •...
Page 7
Put the speaker upside down. » After 30 seconds, it powers off automatically. • To power it on again, press . • To disable the auto sensor, switch the slider to OFF.
4 Use Bluetooth On your device, search for Bluetooth devices. devices In the device list, select SB2000. • If a message prompts for the permission for Bluetooth connection with SB2000, confirm it. With this speaker, you can listen to audio from • If a password is required, enter 0000...
Play audio via Bluetooth Note • If the connected Bluetooth device supports the Advanced Audio Distribution Profile (A2DP), you can listen to tracks that are stored on the device through the system. • If the device also supports the Audio Video Remote Control Profile (AVRCP), you can control play on this product. • If the connected device does not support the AVRCP, control play on the connected device. •...
5 Listen to an external device You can also listen to an external audio device, for example, MP3 player, through this product. Note • Make sure that no device is streaming audio to the speaker via Bluetooth. Open the protective lid. Connect the USB cable between • the micro USB socket on this product, • the headphone socket on the external...
7 Product information Note • Product information is subject to change without prior notice. General information Power Supply (through 5 V USB socket) Built-in Battery Lithium battery (500 mAh, 7.4 V) Dimensions - Main 123 X 92 X 123 mm Unit (W x H x D) Weight - Main Unit 0.6 kg Bluetooth Bluetooth specification...
If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact the Consumer Care, make sure that the product is nearby and the model number and serial number are available.
cardboard (box), requirements and other relevant provisions polystyrene foam (buffer) and polyethylene of Directive 1999/5/EC. You can find the (bags, protective foam sheet.) Declaration of Conformity on www.philips.com/ Your system consists of materials which can support. be recycled and reused if disassembled by a specialized company. Please observe the...
Page 16
WOOX Innovations, and is the manufacturer of the product. WOOX Innovations is the warrantor in relation to the product with which this booklet was packaged. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.